|
Introduction
|
 |
|
Pre-requisite:
Duration:
Description:
|
|
None
12:35 mins
An introduction to the MD Nastran and Patran software products.
Note that this Introduction is considered a pre-requisite for all subsequent Exercises.
|
Exercise 1: Single Bar Element
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction
Linear Static
36:13 mins
Simulate a simple bar element under axial loading.
|
Exercise 2: Single Beam Element
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction, Exercise 1
Linear Static
15:35 mins
Using the same physical situation in exercise 1, simulate with a single beam element instead of a bar element.
|
Exercise 3: Continuum Beam
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction, Exercise 1
Linear Static
27:11 mins
Continue simulating the beam model from Exercise 2 under different loading conditions.
|
Exercise 4: Infinite Thick Pipe
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction, Exercise 1
Linear Static
20:04 mins
Simulate an axisymmetric thick pipe section experiencing internal pressure loads using plane stress and plane strain formulations.
|
Exercise 5: Bimetallic Strip
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction, Exercise 1
Linear Static
16:24 mins
Simulate a bi-metallic strip using two different material models within the same mesh, producing a stress discontinuity at their interface. Examine the effect of thermal loading.
|
Exercise 6: Flat Bar with Edge Notches
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction, Exercise 1
Linear Static
15:19 mins
Simulate a stress concentration.
|
Exercise 7: Cylindrical Shell
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction, Exercise 1
Linear Static
16:21 mins
Simulate a cylindrical shell subjected to bending loads using thin shell elements.
|
Exercise 8a: Hertz Contact Problem
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Introduction,
Exercise 1 & 4
Non-linear
22:51 mins
Simulate a basic non-linear problem with contact conditions.
|
Exercise 8b: Geometry and Mesh for Hertz Contact Problem
|
 |
|
Pre-requisite:
Analysis Type:
Duration:
Description:
|
|
Exercise 8a
Non-linear
24:59 mins
Create geometry and mesh for Exercise 8a: Hertz Contact Problem.
|