SimAcademy Webinar Archive: Base Shake (Single Input) and Multi-Input loading in frequency domain fatigue

Frequency domain methods now exist to enable the durability assessment to be undertaken fully in the frequency domain. Most dynamic analysts prefer to work in the so-called frequency domain where loads are defined as a function of frequency usually as Power Spectral Densities (PSD). Utilizing the most advanced and efficient analysis tool like CAEfatigue. We will explore Base Shake (Single Input) and Multi-Input type of loading in the frequency domain with CAEfatigue.

Automotive accessory manufacturer uses CAE simulation for smart manufacturing

SimAcademy Webinar Archive : Prediction of residual warpage of CFRP based on a ICME approach

In this session, we will learn how Digimat can help to anticipate residual warpage after the cure cycle simulation of a continuous fibre reinforced epoxy. We will describe the material model of the resin and how this one is combined with the reinforcement to compute homogenized properties applied at the lamina level.

Smart Manufacturing Virtual Open House – Virtual Simulation Technology for Assembly

Smart Manufacturing Virtual Open House – Combining Metrology and Simulation to Create a Production Twin for Metal Stamping Dies

Smart Manufacturing Virtual Open House – Additive Manufacturing – Smart Additive Manufacturing

Smart Manufacturing Virtual Open House – Empowering Smart Manufacturing through connecting the virtual and physical worlds

Sound Attenuation Prediction of High Speed Railway Sound Barrier with Actran

Enhance Wind Turbine Driveline and System Performance with CAE Simulation

Acoustics TechWeek Day 5 - Wrap-Up - Introduction to Actran JumpStart

Acoustics TechWeek Day 4 - Duct Acoustics

Acoustics TechWeek Day 2 - Acoustic Radiation

Acoustics TechWeek Day 1 - Industrial Context & Challenges

SimAcademy Webinar Archive: Simulating with FMI Interface

This session of SimAcademy will examine the application of Adams/Controls using FMI interface. The model exchange and co-simulation modes will then be discussed with tips, tricks and recommendations.

Virtual Optimization of Suspension Parameters using Adams Car and pSeven

Pages