The Ohio State University
The OSU Biodynamics Laboratory uses MSC Software to assess lumbar spine forces with different lift devices during patient handling.
Accelerating the Design of an Aortic Valve
University of Stellenbosch - Accelerating the Design of an Aortic Valve using MSC Simulation Software
Simulation of Artificial Cartilage
Rush University Medical Center uses MSC software to simulate artificial cartilage
Vascular Medical Devices
Assessing the Biomechanical Impact of Medical Devices Using MSC Software at Texas A&M University
Fiber Reinforced Elastomeric Isolators
McMaster University - Finite Element Modeling of Stable Unbonded-Fiber Reinforced Elastomeric Isolators (SUFREIs) using Marc
Purdue using SimXpert in Undergraduate Coursework
The teams featured a broad range of products including a car engine, a bicycle, a wind turbine, and a Leonardo da Vinci-inspired ornithopter.
Aeroelastic and Trim Analysis
Patran and MSC Nastran application for aeroelastic analysis and tailoring - Sapienza University of Rome
Subsonic and Supersonic Fixed Wing Projects - Virginia Tech and NASA
The framework supports multiple load-cases analysis as well as different thicknesses for pockets of plate formed by intersection of the stiffeners or uniform panel thickness. The mass of the panel is minimized subjected to constraints on buckling, von Mises stress, and crippling or local failure of the stiffener using global optimization techniques like Particle Swarm Optimization (PSO) or gradient based optimization techniques.Virginia Tech and NASA Subsonic & Supersonic Fixed Wing Projects
Low Velocity Impact Analysis of a Composite Mini Unmanned Air Vehicle During Landing
Turkish Aerospace Industries/Middle East Technical University: In this study belly landing of an unmanned mini air vehicle with low velocity impact on the soil and rigid ground has been investigated by explicit finite element analysis using MSC Dytran.
University of Manitoba Rides Adams/Car to Success
The 2010 Formula team, registered and participated in both the Michigan and California FormulaSAE events
Shaft Assembly in Aero-derivative Gas Turbine System
Composites Engineering and Applications Center, University of Houston Valve-Shaft Assembly in Aero-derivative Gas Turbine System using Patran
Cadillac World Challenge Speed GT
Colorado State University student with Adams knowledge gains internship at Pratt & Miller
Adams/Car for Formula SAE
Adams/Car allowed the vehicle dynamics team to assess the effect of different levels of caster angle on the load transfer characteristics of the car, and also to ensure that the required steering torque wasn't too high for the driver. - University of Birmingham
University of Toronto
University of Toronto students use Adams to simulate quarter suspension vehicle system
University of Wisconsin
Seeing is believing for University of Wisconsin-Madison students using Adams in their 'Kinematics and Dynamics of Machine Systems' course
