Linear Static and Normal Modes Analysis
| Lesson | Support File | |
|
Linear Static Analysis of a Simply-Supported Truss: Create an input file for finite element truss with segments in tension or compression connected by smooth pins. (NAS101) |
|
|
|
Linear Static Analysis of a Simply-Supported Truss: Define a set of material properties for the previous exercise using the beam library and perform static analysis under 3 separate loading conditions. (NAS101) |
|
 |
Linear Static Analysis of a Simply-Supported Stiffened Plate: Create a Simply-Supported Stiffened Plate and prepare a MSC.Nastran input file for Linear Static analysis. (NAS101) |
|
|
Rigid Element Analysis with RBAR: Create a tube model with a 'rigid' end and apply a torque load for linear static analysis. (NAS101) |
|
|
|
Rigid Element Analysis with RBE2 and CONM2: Create a tube model with a 'rigid' end, define mass concentrations and apply a gravitational load for linear static analysis. (NAS101) |
|
|
Modal Analysis of a Circular Plate: Model a circular plate using a 30 degree section for symmetric boundary conditions, submit for modal analysis and find first three natural frequencies with mode shapes. (NAS101) |
|
|
Elastic Stability of a Plate: For a flat plate generate a finite element representation, define the material, apply a force load with boundary conditions and prepare the model for buckling analysis. Additionally, find the first five natural modes |
|
| |
Results Combination Using Restart: Use Restart to add two additional load cases to the truss exercise in Workshop 2. |
|
| The Essence of Result Post-Processing: Run the analysis and read the results back into PATRAN, then generate a plot of X stress tensor and compare results. |
N/A
|
|
|
|
Normal Modes - Rigid Element Analysis with RBE2 and CONM2: Create a tube model with a 'rigid' end, define mass concentrations and perform modal analysis (NAS101) |
|
|
|
Modal Analysis of Interpolation Constraint Elements and Concentrated Mass: Use previous exercise and replace rigid element with interpolation constraint elements. (NAS101) |
|
|
Linear Static Analysis of a Simply-Supported Truss: Create a MSC.Nastran model composed of CROD elements, then visualize analysis results.(NAS101) |
N/A
|
|
Linear Static Analysis of a Simply-Supported Stiffened Plate: Create a MSC.Nastran analysis model composed of CQUAD4 & CBAR elements, then visualize analysis results.(NAS101) |
N/A
|
|
Rigid Element Analysis with RBE2 and CONM2: Idealize a rigid end using RBE2 elements, then submit the file for analysis in MSC.Nastran.(NAS101) |
N/A
|
|
Modal Analysis of Interpolation Constraint Elements and Concentrated Mass: Utilize the analysis model created in a previous model, modify the existing model, and visualize analysis results again.(NAS101) |
N/A
|
|
Modal Analysis of a Circular Plate: Reduce the model to a 30 degree section, and find the first three natural frequencies and mode shapes of the circular plate.(NAS101) |
N/A
|
|
Elastic Stability of a Plate: Produce a Nastran input file, submit the file for analysis, and find the first five natural modes of the plate.(NAS101) |
N/A
|
