MSC.Nastran Bibliography

Detailed Stress Analysis/Global-local Methods

Bedi, Paramjot; Dede, Metin; Moore, Greg. Practical Global-Local Design Optimization of Vehicle Body-In-White Structures, MSC 1996 World Users' Conf. Proc., Vol. IV, Paper No. 34, June, 1996. 

Charron, Francois; Donato, Louis; Fontaine, Mark. Exact Calculation of Minimum Margin of Safety for Frequency Response Analysis Stress Results Using Yielding or Failure Theories, The MSC 1993 World Users' Conf. Proc., Paper No. 5, May, 1993. 

Dahm, R.; Zimmerman, D. Detailed MSC/NASTRAN Component Models-A Tool to Support Vehicle Design, The MSC 1988 World Users Conf. Proc., Vol. II, Paper No. 64, March, 1988. 

Housner, Jerrold M.; Aminpour, Mohammad A.; Dávila, Carlos G.; Schiermeier, John E.; Stroud, W. Jefferson; Ransom, Jonathan B.; Gillian, Ronnie E. An Interface Element for Global/Local and Substructuring Analysis, MSC 1995 World Users' Conf. Proc., Paper No. 25, May, 1995. 

Rose, T. L. Applications of Superelements in Global-Local Analysis, MSC/NASTRAN Application Note, September, 1987. 

Sabahi, Dara; Rose, Ted. Special Applications of Global-Local Analysis, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 49, March, 1990. 

Scapinello, F.; Colombo, E. An Approach for Detailed Analysis of Complex Structures Avoiding Complete Models, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1987. 

Schiermeier, John E.; Housner, Jerrold M.; Ransom, Jonathan B.; Aminpour, Mohammad A.; Stroud, W. Jefferson. The Application of Interface Elements to Dissimilar Meshes in Global/Local Analysis, MSC 1996 World Users' Conf. Proc., Vol. III, Paper No. 27, June, 1996.