 |
MSC.Nastran Bibliography
Error Estimation/Accuracy/Reliability/Quality
Anker, J. C. Names, Numbers
and Numbering Schemes, Proc. of the MSC/NASTRAN Eur. Users' Conf.,
April, 1985.
Balmer, Hans A. Short
Communications-Another Aspect of the Error in Eccentric Beam Formulation,
Int. J. for Numerical Methods in Engineering, Vol. 12, 1978.
Blakely, Ken; Walton, W. B.
Selection of Measurement and Parameter Uncertainties for Finite
Element Model Revision, 2nd Int. Modal Analysis Conf., February,
1984.
Blakely, Ken. Using Design
Sensitivity for Statistical Response Analysis, The MSC 1993 World
Users' Conf. Proc., Paper No. 27, May, 1993.
Bricout, J. N. A Finite
Element Updating Method Used with MSC/NASTRAN, Proc. of the 20th
MSC European Users' Conf., September, 1993.
Caesar, B.; Eckert, L.; Wohler,
H. Update of Dynamic Mathematical Models Using NASTRAN "Application
in Study", Proc. of the 20th MSC European Users' Conf., September,
1993.
Caldwell, Steve; Wang, B. P.
Application of Approximate Techniques in the Estimation of Eigenvalue
Quality, The MSC 1993 World Users' Conf. Proc., Paper No. 11,
May, 1993.
Case, W. R.; Vandegrift, R.
E. Accuracy of Three Dimensional Solid Finite Elements,
Twelfth NASTRAN Users' Colloq., pp. 26-46, May, 1984, (NASA CP-2328).
Chanda, S.; Diserens, N. A
Post-Processor for Error Estimation in Static Analysis, Proc.
of the MSC/NASTRAN Eur. Users' Conf., May, 1987.
Cheng, J. C.; Campbell, G.
C.; Nagy, L. I. Grid Point Stress Calculation, Error Prediction
and Automatic Remeshing Procedure, The MSC 1991 World Users' Conf.
Proc., Vol. II, Paper No. 59, March, 1991.
Haggenmacher, Gernot W. Some
Aspects of NASTRAN Solution Accuracy, NASTRAN: Users' Exper.,
pp. 47-64, September, 1971, (NASA TM X-2378).
Honma, Toshiaki. Study
on Mean Grid Point Stress Calculation Method on Shell Element of MSC/NASTRAN,
The Fourth MSC/NASTRAN User's Conf. in Japan, October, 1986, in Japanese.
Kalinowski, A. J. Solution
Sensitivity and Accuracy Study of NASTRAN for Large Dynamic Problems Involving
Structural Damping, Ninth NASTRAN Users' Colloq., pp. 49-62, October,
1980, (NASA CP-2151).
Kelly, Don W.; Isles, J. D.;
Cerezo, J. J.; Wiltshire, W. H. Finite Element Solution Accuracy
and Model Validation- Research Aspects, The Second Australasian
MSC Users Conf. Proc., Paper No. 13, November, 1988.
Ko, William L.; Olana, Timothy.
Effect of Element Size on the Solution Accuracies of Finite-Element
Heat Transfer and Thermal Stress Analyses of Space Shuttle Orbiter,
Sixteenth NASTRAN Users' Colloq., pp. 79-127, April, 1988, (NASA CP-2505).
MacNeal, R. H. A Comparison
of Higher Order vs. Lower Order Elements, Economics and Accuracy,
Computational Aspects of the Finite Element Method, 1977.
MacNeal, R. H. Higher
Order vs. Lower Order Elements - Economics and Accuracy, Proc.
of the 2nd World Conf. on Finite Element Methods, pp. 201-215, 1978.
MacNeal, R. H. Finite
Element Reliability and Standards, Proc. of the MSC/NASTRAN Eur.
Users' Conf., Paper No. 14, April, 1985.
MacNeal, R. H. The Reliability
of Finite Element Tools, Finite Elements in Analysis and Design,
Vol. 2, No. 3, pp. 249-257, October, 1986.
MacNeal, R. H. A Single
Element Test for Membrane Locking of Curved Shell Elements, Proceedings
of the Second Int. Conf. on Quality Assurance and Standards in Finite
Element Analysis (NAFEMS), May, 1989.
Maroger, Y. Calculation
Engineering, a Tool Among Others, Proc. of the 17th MSC Eur. Users'
Conf., Paper No. 2, September, 1990.
McVee, J. D.; Cross, R.; Foster,
A. Quality Assurance of MSC/NASTRAN Models of Naval Structures,
Proc. of the Sixteenth MSC Eur. Users' Conf., Paper No. 25, September,
1989. (paper not available)
McVee, J. D.; Nisbet, S. Application
of Haggenmacher and Lahey's Skew Membrane Tests to the MSC/NASTRAN QUADR
and TRIAR Elements and the MSC/PROBE Planar Quadrilateral and Triangular
Element, Proc. of the 19th MSC European Users' Conf., Paper No.
28, September, 1992.
Miller, Robert P. Reduction
of the Error in Eccentric Beam Modeling, Int. J. for Numerical
Methods in Engineering, Vol. 15, 1980.
Ojalvo, I. U.; Pilon, D. Assumptions
and Accuracies Associated with the MSC/NASTRAN ROD, BAR, and QUAD4 Elements,
The MSC 1987 World Users Conf. Proc., Vol. I, Paper No. 9, March, 1987.
Peano, Dr. A. A Posteriori
Error Estimation and Adaptivity, Proc. of the 15th MSC/NASTRAN
Eur. Users' Conf., October, 1988.
Rainer, G. Ph. Improved
Simulation of Operating Conditions for FE-Calculations-Supporting Means
and Procedures, The MSC 1992 World Users' Conf. Proc., Vol. II,
Paper No. 40, May, 1992.
Rosser, David C.; Rogers, James
L. Jr. The NASTRAN Error Correction Information System (ECIS),
NASTRAN: Users' Exper., pp. 493-510, September, 1975, (NASA TM X-3278).
Shephard, Mark S. Reliable
Finite Element Modeling for Engineering Design, The MSC 1990 World
Users Conf. Proc., Vol. I, Paper No. 8, March, 1990.
Szabo, Dr. Barna A. Reliability
in Finite Element Computations, Proc. of the 18th MSC Eur. Users'
Conf., Paper No. 3, June, 1991.
Thacker, Jr., Robert P. MSC/NASTRAN:
Shell and Solid Element Mesh Requirements in the Vicinity of a Circular
Hole Stress Concentration, The MSC 1993 World Users' Conf. Proc.,
Paper No. 3, May, 1993.
Wang, B. P.; Caldwell, S. P.
Reducing Truncation Error in Structural Dynamic Modification,
The MSC 1991 World Users' Conf. Proc., Vol. I, Paper No. 11, March, 1991.
Welte, Y. Accuracy Check
of Analysis Results Computed on a Nearly Singular Structure, Proc.
of the 15th MSC/NASTRAN Eur. Users' Conf., Paper No. 28, October, 1988.
Zins, J.; Lister, S. The
Hubbard Method of Quality Control Applied to Finite Element Analysis,
Proc. of the MSC/NASTRAN Eur. Users' Conf., Paper No. 17, May, 1987.
|
|
