MSC.Nastran Bibliography

Materials: Composites

(Korean). Thermal Distortion of Satellite Antenna Considering Main and Sub Reflector, MSC 1994 Korea Users' Conf. Proc., December, 1994, in Korean. 

Anamateros, E.; Barani, F. Analytical Evaluation of a Composite Loop-Winding by Use of Mono and Tridimensional Element Models and Experimental Correlation, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. Paper No. 22.

Anamateros, E.; Severoni, R.; Valentini, P. Large Cylindrical Composite Structure for Aeronautical Application Structural Analysis, Proc. of the 18th MSC Eur. Users' Conf., Paper No. 15, June, 1991. 

Arakaki, Francisco Kioshi. A Simple Model to Analyze the Through-Width Delaminations, MSC 1996 World Users' Conf. Proc., Vol. IV, Paper No. 39, June, 1996. 

Ardic, E. Selcuk; Bolcan, Can; Kayran, Altan. Method of Strain and Stress Analysis of Composites for Nonlinear Strain Distribution Case, International Journal of Solids and Structures v 31 n 24 Dec 1994. 

Baumann, E. Finite Element Analysis of Advanced Composite Structures Containing Mechanically Fastened Joints, Computational Aspects of the Finite Element Method, 1981. 

Bindolino, G.; Lanz, M.; Bassoli, M. Optimal Shape of Composite Flexbeams for Helicopter Rotors, MSC 1995 European Users' Conf. Proc., Italian Session, September, 1995. 

Boruszewski, W.; Kataoka-Filho, M. Designing Optimum Fibre Layout for Composite Sandwich Panels, MSC 1996 World Users' Conf. Proc., Vol. V, Paper No. 56, June, 1996. 

Bourcier, R., et al. Application of MSC/NASTRAN to Aerospace Structural Analysis at U. N. S. W., The Fifth Australasian MSC Users Conf. Proc., Paper No. 17, November, 1991. 

Brunner, M. QUAD4C, A Failure Prediction Element for Fibre Reinforced Composites in NASTRAN, NASTRAN User's Conf., May, 1979. Paper No. 7.

Caracciolo, A. MSC/NASTRAN Static and Buckling Analysis for Composite Material Laminates, NASTRAN User's Conf., April, 1978. Paper No. 12.

Chamis, C. C.; Sinclair, J. H.; Sullivan, T. L. NASTRAN as an Analytical Research Tool for Composite Mechanics and Composite Structures, NASTRAN: Users' Exper., pp. 381-418, October, 1976, (NASA TM X-3428). 

Cifuentes, Arturo O. Finite Elements and Structural Mechanics in Electronic Packaging: Present and Future, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 56, March, 1990. 

Collier, Craig S.; Spoth, Kevin; Grassi, Glenn. Thermomechanical Finite Element Analysis of Stiffened, Unsymmetric Composite Panels with Two Dimensional Models, The MSC 1993 World Users' Conf. Proc., Paper No. 31, May, 1993. 

Collier, Craig, S., P.E. An Integrated FEA and Design Optimization System for Composite Structures, MSC 1996 World Users' Conf. Proc., Vol. II, Paper No. 14, June, 1996. 

Collier, Craig S. Stiffness, Thermal Expansion, and Thermal Bending Formulation of Stiffened, Fiber-Reinforced Composite Panels, 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, California, 1993. 

D'Alessandro Caprice, Manfredo. Finite Element Analysis of Delamination Growth in Compresively Loaded Composite Materials, MSC 23rd European Users' Conf. Proc., Italian Session, September, 1996. 

Daniel, Walter K.; Vizzini, Anthony J. Prediction of Free-Edge Delamination Initiation in Composite Laminated Under Torsional Loading, 31st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., Part 2, pp. 1253-1259, April, 1990. 

Elspass, W. Design of High Precision Sandwich Structures Using Analytical and Finite Element Models, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 54, March, 1990. 

Erarslanoglu, Gursel; Ardic, E. Selcuk; Dayran, Altan; Bolcan, Can. Method of Failure Prediction in Laminated Composites Subjected to Low-Velocity Impact, Proceedings of the 2nd Biennial European Joint Conference on Engineering Systems Design and Analysis, London, 1994. 

Everstine, Gordon C.; Marcus, Melvyn S. Finite Element Prediction of Loss Factors for Structures with Frequency- Dependent Damping Treatments, Thirteenth NASTRAN Users' Colloq., pp. 419-430, May, 1985, (NASA CP-2373). 

Falzon, P. J.; Herszberg, I.; Baker, A. A. Stiffness Analysis of Textile Composites, Proceedings of the 5th Australian Aeronautical Conference. Part 1 (of 2), 1993. 

Farley, Mike. Interfacing CAD/CAM to a Graphic Pre- and Postprocessor to Perform a Nonlinear Buckling Analysis of a Composite Structure, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 34, March, 1990. 

Geyer, A.; Schweiger, W. Design Optimization of Plastics, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1987. Paper No. 22. 

Giordano, F.; Santoro, D.; Calcagni, M. Post-Buckling Analysis of the C/E Stiffened Panel of the ATR 42/72 Vertical Fin, MSC 23rd European Users' Conf. Proc., Italian Session, September, 1996. 

Goldberg, Robert K.; Comiskey, Michele D. COMGEN-BEM: Boundary Element Model Generation for Composite Materials Micromechanical Analysis, MSC 1995 World Users' Conf. Proc., Paper No. 23, May, 1995. 

Goncalves, Waldir Gomes; Muller de Almeida, S. F. Composite Bolted Joints Analysis Methods, Proc. of the 2nd MSC/NASTRAN Users' Conf. in Brazil, Paper No. 4, March, 1993, in Portuguese. 

Hatheway, Alson E. Evaluating Stresses in Adhesive Bond Lines, The 1989 MSC World Users Conf. Proc., Vol. II, Paper No. 32, March, 1989. 

Hauser, H.; Matheron, G. Presentation of MSC/NASTRAN Compatible Preprocessor for Modeling Structures Made of Composite Materials, Proc. of the 17th MSC Eur. Users' Conf., Paper No. 22, September, 1990. 

Hirayama, Norio; Andoh, Yuka; Murakami, Hirotaka; Ayame, Masatomo. Development of FEM Modeling Method for Three-dimensional Composite Structure, 1994 MSC Japan Users' Conf. Proc., December, 1994. 

Hodges, Robert V.; Nixon, Mark W.; Rehfield, Lawrence W. Comparison of Composite Rotor Blade Models: A Coupled-Beam Analysis and an MSC/NASTRAN Finite-Element Model, National Aeronautics and Space Administration, March, 1987, (NASA TM-89024). 

Hogg, Ian C.; Janardhana, Madabhushi N. Surface Preparation of Adhesively Bonded Joints, Proceedings of the International Conference on Advanced Composite Materials, 1993. 

Honeycutt, George H.; On, Frank J.; Hanlein, Stuart L. Comparison of NASTRAN and STARDYNE Static Analysis of a Graphite Fiber Reinforced Plastic Truss Structure, NASTRAN: Users' Exper., pp. 303-314, September, 1972, (NASA TM X-2637). 

Housner, Jerrold M.; Aminpour, Mohammad A.; Dávila, Carlos G.; Schiermeier, John E.; Stroud, W. Jefferson; Ransom, Jonathan B.; Gillian, Ronnie E. An Interface Element for Global/Local and Substructuring Analysis, MSC 1995 World Users' Conf. Proc., Paper No. 25, May, 1995. 

Hsu, Lu-Jiin; Chiou, Hua-Tzong; Chen, Kuo-Her. A Study of the Deformation Behavior of Wing for Composite Material, The 2nd Annual MSC Taiwan Users Conf., Paper No. 4, October, 1990. 

Jiang, L.; Liew, K.M.; Lim, M.K.; Low, S.C. Vibratory Behaviour of Delaminated Honeycomb Structures: a 3-D Finite Element Modelling, Computers and Structures v 55 n 5 Jun 3 1995. 

Johnson, Conor D.; Keinholz, David A. Prediction of Damping in Structures with Viscoelastic Materials Using MSC/NASTRAN, MSC/NASTRAN Users' Conf. Proc., Paper No. 17, March, 1983. 

Kam, T. Y.; Yang, C. M.; Wu, J. H. Determination of Natural Frequencies of Laminated Composite Space Structures Via The Experiemental and Finite Element Approaches, The Sixth Annual MSC Taiwan Users' Conf. Proc., Paper No. 5, November, 1994. 

Kienholz, Dave K.; Johnson, Conor D.; Parekh, Jatin C. Design Methods for Viscoelastically Damped Sandwich Plates, AIAA/ASME/ASCE/AHS 24th Structures, Structural Dynamics and Materials Conf., Part 2, pp. 334-343, May, 1983. 

Kuruppu, M.; Kelly, D. W.; Elsley, M.; Bourcier, R. Post-Buckling Analysis of Stiffened Composite Panels, The Sixth Australasian MSC Users Conf. Proc., November, 1992. Paper No. 19. 

Lajczok, M. R. New Approach in the Determination of Interlaminar Shear Stresses from the Results of MSC/NASTRAN, Computers and Structures, Vol. 24, No. 4, pp. 651-656, 1986. 

Liew, K. M.; Jiang, L.; Lim, M. K.; Low, S. C. Numerical Evaluation of Frequency Responses for Delaminated Honeycomb Structures, Computers and Structures v 55 n 2 Apr 17 1995. 

Lin, Chun-Bo; Lu, Yain-Kun. Bolt-Joint Analysis of Composite Laminates Subjected to By-Pass Load, The 4th MSC Taiwan Users' Conf., Paper No. 16, November, 1992. 

Lin, Shiann-Tang; Chiu, Huang-Ming; Sa, Dong-Liang. Strength Prediction of Pin Loaded Hole in Laminate Composites, The 2nd Annual MSC Taiwan Users Conf., Paper No. 15, October, 1990. 

Lindsay, Timothy C.; Wilkins, Dick J. Use of Microcomputer-Based FEA in Early Design (Concept Evaluation) of Composite Structures for Low Velocity Impact Resistance, The MSC 1991 World Users' Conf. Proc., Vol. I, Paper No. 30, March, 1991. 

Lopez, F. de Nicolas; Garcia, M. Huertas. Prediction of Interlaminar Stresses in Skin-Stiffener Interface with MSC/NASTRAN, Proc. of the 19th MSC European Users' Conf., Paper No. 27, September, 1992. 

Lu, Y. P.; Killian, J. W.; Everstine, G. C. Vibrations of Three Layered Damped Sandwich Plate Composites, J. of Sound and Vibration, Vol. 64, No. 1, pp. 63-71, 1979. 

Lu, Y. P.; Everstine, G. C. More on Finite Element Modeling of Damped Composite Systems, J. of Sound and Vibration, Vol. 69, No. 2, pp. 199-205, 1980. 

Lundgren, Gert. MSC's Solvers Predict the Best Attachment of the Sunbeam Tiger Fiberglass Front-End, MSC 1996 World Users' Conf. Proc., Vol. II, Paper No. 16, June, 1996. 

Lux, Louis E. Composite Analysis Using SDRC SUPERTAB and MSC/NASTRAN, The MSC 1988 World Users Conf. Proc., Vol. I, Paper No. 12, March, 1988. 

Ma, Sheau-Fa; Hsu, Jer-Min. Effect of Interlaminar Stresses on the Failure of Composite Laminates, The 4th MSC Taiwan Users' Conf., Paper No. 4, November, 1992, in Chinese. 

Ma, Sheau-Fan; Hsu, Jer-Ming. Thermal Buckling of Laminated Composite Plates with Cutouts, The Fifth Annual MSC Taiwan Users' Conf. Proc., November, 1993. 

Martin, Paul F. Comparison of Honeycomb Plate Models Using MSC/NASTRAN, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 55, March, 1990. 

Maydom, C. D.; Scott, M. L. Finite Element Analysis of Terminating Plies in Advanced Fibre Composite Panels, The Fifth Australasian MSC Users Conf. Proc., Paper No. 6, November, 1991. 

Meyer, Keith J.; Rahmann, Steven. Interactive Laminate Postprocessing of NASTRAN Structural Analysis, The MSC 1987 World Users Conf. Proc., Vol. I, Paper No. 20, March, 1987. 

Mohajerjasbi, Soheil. Modeling and Analysis of 4-Step 3-D Cartesian Braided Composites, The MSC 1993 World Users' Conf. Proc., Paper No. 75, May, 1993. 

Murthy, P. L. N.; Chamis, C. C. Dynamic Stress Analysis of Smooth and Notched Fiber Composite Flexural Specimens, National Aeronautics and Space Administration, April, 1984, (NASA TM-83694). 

Murthy, P. L. N.; Chamis, C. C. Study of Interply Layer Effects on the Free-Edge Stress Field of Angleplied Laminates, Computers and Structures, Vol. 20, No. 1-3, pp. 431-441, 1985. 

Murthy, P. L. N.; Chamis, C. C. Dynamic Stress Analysis of Smooth and Notched Fiber Composite Flexural Specimens, Composite Materials: Testing and Design (Seventh Conf.), ASTM, pp. 368-391, 1986, (ASTM STP 893). 

Nagendra, Gopal K.; Fleury, Claude. Sensitivity and Optimization of Composite Structures Using MSC/NASTRAN, MSC/NASTRAN Users' Conf. Proc., Paper No. 20, March, 1986. 

Narayanaswami, R. (Swami); Cole, J. G. Layered Composite Analysis Capability for NASTRAN, Thirteenth NASTRAN Users' Colloq., pp. 67-109, May, 1985, (NASA CP-2373). 

O'Hara, G. Peter. Finite Element Analysis of Fiber Wrapped Shells with Non-Symmetric Loads, Sixth NASTRAN Users' Colloq., pp. 369-383, October, 1977, (NASA CP-2018). 

Patel, Yakub A. Deformations of Thick Two-Material Cylinder Under Axially Varying Radial Pressure, NASTRAN: Users' Exper., pp. 161-176, October, 1976, (NASA TM X-3428). 

Park, Joon B.; Visintainer, Randal H. Finite Element Analysis (FEA) of the Static and Dynamic Response of the Sheet Mold Compounding (SMC) Structure Using the Enhanced Modeling Technique of the Adhesive Joining Region, The MSC 1993 World Users' Conf. Proc., Paper No. 63, May, 1993. 

Pitt, D. Stress Analysis of Composite Reinforced Rubber Hoses Using NASTRAN, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1986. 

Rahhal, W. F.; Ng, G. Shek. Interlaminer Stresses in a Laminated Angle Bracket, Proc. of the MSC/NASTRAN Users' Conf., March, 1979. Paper No. 8 

Rais-rohani, M. Thin Tailored Composite Wing for Civil Tiltrotor, National Aeronautics and Space Administration, Washington, DC., December, 1994. 

Ramsay, A. Evaluation of NASTRAN Elements in the Analysis of Fibre-Reinforced Composites, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1982. Paper No. 12. 

Ranger, Ken. Finite Element Analysis of Laminated Composite Plates on a Personal Computer, The MSC 1991 World Users' Conf. Proc., Vol. I, Paper No. 31, March, 1991. 

Redford, Monique; Jensen, David W. Theoretical Compressive Integrity of Curved Hat-Stiffened Composite Panels with Embedded Optical Fibers, Proceedings of the 36th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and AIAA/ASME Adaptive Structures Forum, Part 5 (of 5), New Orleans, 1995. 

Robertson, D. D.; Mall, S. Fiber-Matrix Interphase Effects upon Transverse Behavior in Metal-Matrix Composites, J. of Composites Technology and Research, Vol. 14, No. 1, pp. 3-11, Spring, 1992. 

Rogoff, P.; Brown, G. M. FEA Predictions for the Elasto-Plastic Behavior of the Copper-Steel Plate Composites, The MSC 1988 World Users Conf. Proc., Vol. II, Paper No. 53, March, 1988. 

Rohwer, K. Transverse Shear Effect on Laminated Composite Plates, Proc. of the Sixteenth MSC Eur. Users' Conf., Paper No. 24, September, 1989. 

Rolfes, R. A New Finite Element for Thermal Analysis of Laminated Composite Plates, Proc. of the 17th MSC Eur. Users' Conf., Paper No. 30, September, 1990. 

San Martin, J. G. Study of a Union Between Carbon Fibre Sandwich and a Metallic Ring with MSC/NASTRAN, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1984. 

Schneermann, M. COMDAT-A Preprocessor for Material and Element Data Generation for Composite Materials, NASTRAN User's Conf., May, 1979. 

Scott, M. L. Finite Element Modelling of Delamination in Fibre Composite Laminates, The Third Australasian MSC Users Conf. Proc., Paper No. 3, November, 1989. 

Scott, Murray. The Development of an MSC/NASTRAN Finite Element Model of a Sailplane Fibre Composite Wing Structure, The First Australasian MSC Users Conf. Proc., Paper No. 19, June, 1987. 

Scott, Murray L. Non-Linear Finite Element Modelling of an Integrally Stiffened Composite Panel, Proceedings of the International Workshop on Computer-Aided Engineering for Composite Structures, 1994. 

St. Ville, J. A.; Ecker, J. A.; Winget, J. M.; Berghauer, M. H. The Anatomy of Mid-Thigh Pain After Total Hip Arthroplasty, Johns Hopkins APL Technical Digest, Vol. 12, No. 2, pp. 198-214, April-June, 1991. 

Stockwell, Alan E. Nonlinear Bending and Collapse of Composite Tubes, The MSC 1992 World Users' Conf. Proc., Vol. II, Paper No. 51, May, 1992. 

Tejero, P.; Molinero, V. Gomez. Experiences Found Modeling CFRP Antennae Reflectors Using MSC/NASTRAN, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. 

Trentin, Christian; Alesi, Hans; Scott, Murray. Finite Element Analysis of Postbuckling Fibre Composite Structures, The Sixth Australasian MSC Users Conf. Proc., November, 1992. Paper No. 7. 

Trentin, Christian; Alesi, Hans; Scott, Murray L. Postbuckling Performance of Stiffened Fibre Composite Panels, Proceedings of the 5th Australian Aeronautical Conference Part 1 (of 2), 1993. 

Urban, Michael R.; Dobyns, Alan. MSC/NASTRAN Transient Analysis of Cannon Recoil Loads on Composite Helicopters, The MSC 1991 World Users' Conf. Proc., Vol. I, Paper No. 28, March, 1991. 

Wang, B. P.; Lu, C. M.; Yang, R. J. Topology Optimization Using MSC/NASTRAN, MSC 1994 World Users' Conf. Proc., Paper No. 12, June, 1994. 

Wang, T.; Smolinski, K. F.; Gellin, S. Symmetric Composite Laminate Stress Analysis, Thirteenth NASTRAN Users' Colloq., pp. 234-244, May, 1985, (NASA CP-2373). 

Wang, W. Y.; Yu, Chiang. Internal Load Analysis of a Composite Horizontal Stabilizer, The 2nd Annual MSC Taiwan User's Conf., Paper No. 17, October, 1990. 

Wilt, J. C. Use of Composite Materials in NASTRAN, AIAA/ ASME/ASCE/AHS 24th Structures, Structural Dynamics and Materials Conf., Part 1, pp. 612-622, May, 1983. 

Woodmansee, Paul R.; Gans, Howard D. Finite Element Analysis of Porosity on Material Properties Using MSC/NASTRAN, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 53, March, 1990.