 |
MSC.Nastran Bibliography
Piping
Blakely, Ken; Howard, G. E.;
Walton, W. B.; Johnson, B. A.; Chitty, D. E. Pipe Damping Studies
and Nonlinear Pipe Benchmarks from Snapback Tests at the Heissdampfreaktor,
NUREG/CR-3180, March, 1983.
Chen, Yohchia. Refined
Analysis for Soil-Pipe Systems, MSC 1994 World Users' Conf. Proc.,
Paper No. 38, June, 1994.
Blakely, Ken; Howard, G. E.;
Walton, W. B.; Johnson, B. A.; Chitty, D. E. Comparison of a Nonlinear
Dynamic Model of a Piping System to Test Data, 7th Int. Conf.
on Struct. Mech. in Reactor Tech., August, 1983.
Cifuentes, Arturo. Analysis
of Water Distribution Networks Using MSC/NASTRAN, The MSC 1988
World Users Conf. Proc., Vol. I, Paper No. 28, March, 1988.
Ertas, A.; Mustafa, G.; Cuvalci,
O. Comparison of Fracture Mechanics and S-N Curve Approaches in
Designing Drill Pipe, American Soc. of Mechanical Engineers, Petroleum
Division, Vol. 26, pp. 45-50, January 1989.
Everstine, G. C.; Marcus, M.
S.; Quezon, A. J. Finite Element Analysis of Fluid-Filled Elastic
Piping Systems, Eleventh NASTRAN Users' Colloq., pp. 141-160,
May, 1983.
Everstine, G. C. Dynamic
Analysis of Fluid-Filled Piping Systems Using Finite Element Techniques,
J. of Pressure Vessel Technology, Vol. 108, pp. 57-61, February, 1986.
Fujimoto, T.; Soh, T. Flexibility
Factors and Stress Indices for Piping Components with D/T Greater than
Equivalent to 100 Subjected to In-Plane or Out-of-Plane Moment,
J. of Pressure Vessel Technology, Trans. of the ASME, Vol. 110, No. 4,
pp. 374-386, November, 1988.
Geyer, A.; Schweiger, W. Multiple
Support Excitation for NASTRAN Piping Analysis, Proc. of the MSC/NASTRAN
Eur. Users' Conf., April, 1982.
Hamada, Tsuneaki. Design-Analysis
System for 3-D Piping Arrangement, The Fifth MSC/NASTRAN User's
Conf. in Japan, October, 1987, in Japanese.
Konno, Daisuke; Maekawa, Seiyo;
Wakigawa, Asahiro. Study of Allowable Piping Loads on Double-Suction
Centrifugal Pumps: 2nd Report, Shaft Displacement Due to Pump Casing Deformation,
Nippon Kikai Gakai Ronbunshu, B Hen, Vol. 51, No. 465, pp. 1660-1665,
May, 1985, in Japanese.
Konrad, M. FEM Analysis
of a Multi-Component Pipe Fitting, Proc. of the MSC/NASTRAN Eur.
Users' Conf., May, 1986.
Lee, H. P. Penetration
Analyses Due to Pipewhip Loads, MSC 1996 World Users' Conf. Proc.,
Vol. IV, Paper No. 41, June, 1996.
Miller, R. D. Theoretical
Analysis of HVAC Duct Hanger Systems, Fifteenth NASTRAN Users'
Colloq., pp. 222-249, August, 1987, (NASA CP-2481).
Nelson, Norman W. Application
of NASTRAN to a Fluid Solids Unit in the Petroleum Industry, NASTRAN:
Users' Exper., pp. 121-136, September, 1975, (NASA TM X-3278).
Quezon, Antonio J.; Everstine,
Gordon C. Comparison of Finite Element Analyses of a Piping Tee
Using NASTRAN and CORTES/SA, Ninth NASTRAN Users' Colloq., pp.
224-242, October, 1980, (NASA CP-2151).
Sauer, G.; Marb, W. Reduction
of Operational Stresses in a Branch Pipe Due to Local Yielding,
Proc. of the 15th MSC/NASTRAN Eur. Users' Conf., October, 1988.
Soh, Tadashi; Fujimoto, Toshio.
Flexibility Factors and Stress Indices of Thin-Walled Piping Bends
with Large Diameter, RandD, Research and Development (Kobe Steel,
Ltd.), Vol. 36, No. 2, pp. 80-84, April, 1986, in Japanese.
Winter, J. Ronald. NASTRAN
Analysis of Heat-Transfer Fluid Filled Pipe Failures, Ninth NASTRAN
Users' Colloq., pp. 140-160, October, 1980, (NASA CP-2151).
Young, Clarence P. Jr.; Gerringer,
Harper A.; Faison, Richard W. NASTRAN Analysis of an Air Storage
Piping System, NASTRAN: Users' Exper., pp. 89-102, September,
1973, (NASA TM X-2893).
|
|
