MSC.Nastran Bibliography

Pre- and Postprocessing: General

Abbey, A. J.; Knights, C. A. A Fully Automated Approach to Design Analysis, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. 

Alcorn, Mary L.; Moharir, M. M. INTERNAST: A Gateway to MSC/NASTRAN, The MSC 1991 World Users' Conf. Proc., Vol. II, Paper No. 55, March, 1991. 

Alliston, Bob; Willey, Jim. Modeling with the FEM181 Stand-Alone Interactive Graphics System and MSC/NASTRAN, MSC/NASTRAN Users' Conf., March, 1978. 

Anker, J. C. Names, Numbers and Numbering Schemes, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. 

Balasubramanian, B.; Sahm, M. A Cross-Sectional Processor for Finite Element Structures, NASTRAN User's Conf., June, 1981. 

Belie, Robert G. Finite Element Analysis and Color Graphics, Proc. of the Conf. on Finite Element Methods and Technology, Paper No. 21, March, 1981. 

Bella, David F. MSC/NASTRAN Pre-Processor for Performing Zernike Polynomial Analysis, Proc. of SPIE-The Int. Soc. for Optical Engineering, Vol. 748, pp. 89-95, January, 1987. 

Blakely, Ken; Zelenski, Paul. FEA Comes of AGE, CAE, March, 1988. 

Bohmler, G. FEMGEN-A General Finite Element Mesh Generator, NASTRAN User's Conf., April, 1978. 

Brown, J. J.; Lee, J. M.; Parker, G. R.; Zuhuruddin, K. Procedure for Processing and Displaying Entire Physical Modes Based on Results Generated Through Component Mode Synthesis, The MSC 1988 World Users Conf. Proc., Vol. I, Paper No. 15, March, 1988. 

Brown, W. K.; Schoellmann, W. F. Study of the NASTRAN Input/Output Subsystems, Sixth NASTRAN Users' Colloq., pp. 75-92, October, 1977, (NASA CP-2018). 

Brunner, M. NASEDIT-the Interactive NASTRAN Editor, NASTRAN User's Conf., June, 1981. 

Brunner, M.; Pilot, D. SPF-8-Point-a Software Package to Support the Dialogue with NASTRAN, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1984. 

Brunner, M. A New Programmed ASSIGN Feature in NASTRAN, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1986. 

Brunner, M.; Liebe, D. Module MERGEOFP2 - A New Treatment of the Superelement Output for Postprocessing, Proc. of the 15th MSC/NASTRAN Eur. Users' Conf., October, 1988. 

Buck, K. E.; Bodisco, U. V.; Winkler, K. SUPERNET-A System of Programs for Integrated Finite Element Data Generation and Presentation of Results, NASTRAN User's Conf., April, 1978. 

Burk, Robert C.; Held, Fred H. An Interactive Graphics System to Facilitate Finite Element Structural Analysis, NASTRAN: Users' Exper., pp. 679-696, September, 1973, (NASA TM X-2893). 

Burroughs, S. H.; Lawlor, M. B.; Miller, Dr. I. M. Pre and Post Processing Using the IBM 3277 Display Station Graphics Attachment (RPQ7H0284), Seventh NASTRAN Users' Colloq., pp. 123-130, October, 1978, (NASA CP-2062). 

Chan, Gordon C. BANDIT in NASTRAN, Eleventh NASTRAN Users' Colloq., pp. 1-5, May, 1983. 

Chan, Gordon C. On Bulk Data Cards Processing, Sixteenth NASTRAN Users' Colloq., pp. 1-11, April, 1988, (NASA CP-2505). 

Chanda, S.; Diserens, N. A Post-Processor for Error Estimation in Static Analysis, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1987. 

Chiou, Hua-Tzong; Wu, Tien-Sheng; Chiu, Huang-Ming. Practical Application of Integrated Computer Aided Design and Analysis with NASTRAN, The 2nd Annual MSC Taiwan Users Conf., Paper No. 9, October, 1990, in Chinese. 

Coddington, Richard C.; Nazario, Jose O. Use of COSMIC NASTRAN in a Design Department, Thirteenth NASTRAN Users' Colloq., pp. 289-307, May, 1985, (NASA CP-2373). 

Coppolino, Robert N.; Bella, David F. Employment of MSC/STI-VAMP for Dynamic Response Post-Processing, The MSC 1987 World Users Conf. Proc., Vol. I, Paper No. 12, March, 1987. 

Corlett, R. A.; Humphrey, A. T.; Trumpeter, J. N. A Knowledge Based CONSULTANT for NASTRAN, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1984. 

Couture, Martin; Desy, Philippe; Perron, Claude. Automatic Stick Model Generation for MSC/NASTRAN, The MSC 1991 World Users' Conf. Proc., Vol. I, Paper No. 22, March, 1991. 

Cronk, Michael. An Interactive Computer Graphics Program for NASTRAN, NASTRAN: Users' Exper., pp. 659-668, September, 1971, (NASA TM X-2378). 

Dewhirst, Donald; Grinsell, Peter M.; Tucker, John R.; Mahajan, Alok. Joining Tetrahedra to Hexahedra, The MSC 1993 World Users' Conf. Proc., Paper No. 45, May, 1993. 

Durocher, Lawrence L.; Gasper, Andrew F. An Interactive Review System for NASTRAN, Tenth NASTRAN Users' Colloq., pp. 45-64, May, 1982, (NASA CP-2249). 

Enterprise Software Products, Inc. FEMAP-Power and Simplicity in PC Modeling, The MSC 1987 World Users Conf. Proc., Vol. II, Paper No. 7, March, 1987. 

Everstine, Gordon C. The BANDIT Computer Program for the Reduction of Matrix Bandwidth for NASTRAN, NASTRAN: Users' Exper., pp. 407-414, September, 1972, (NASA TM X-2637). 

Everstine, Gordon C.; McKee, James M. A Survey of Pre- and Postprocessors for NASTRAN, Structural Mechanics Computer Programs: Surveys, Assessments, and Availability, ed. by W. Pilkey, K. Saczalski, and H. Schaeffer, University Press of Virginia, pp. 825-843, 1974. 

Everstine, Gordon C. Recent Improvements to BANDIT, NASTRAN: Users' Exper., pp. 511-522, September, 1975, (NASA TM X-3278). 

Everstine, Gordon C. Reduction of Matrix Wavefront for NASTRAN, Seventh NASTRAN Users' Colloq., pp. 111-122, October, 1978, (NASA CP-2062). 

Farley, Mike. Interfacing CAD/CAM to a Graphic Pre- and Postprocessor to Perform a Nonlinear Buckling Analysis of a Composite Structure, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 34, March, 1990. 

Farley, Mike. Pre- and Postprocessing Large Detailed MSC/NASTRAN Models, The MSC 1991 World Users' Conf. Proc., Vol. II, Paper No. 62, March, 1991. 

Fousek, Daniel. FASTDRAW/3 Interactive Postprocessing, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Fousek, Daniel P. FASTDRAW Interactive Postprocessing, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Fresko, D.; Neer, A. GIN (General Interface to NASTRAN): A Data Management System for MSC/NASTRAN Models, The MSC 1988 World Users Conf. Proc., Vol. II, Paper No. 49, March, 1988. 

Frick, Raymond N. Post Processing of Rotational Cyclic Symmetric Models, The MSC 1992 World Users' Conf. Proc., Vol. II, Paper No. 38, May, 1992. 

Furuike, T.; Yahata, S. Vehicle Structural Analysis - Pre and Post Processor Data Handling, NASTRAN: Users' Exper., pp. 697-708, September, 1971, (NASA TM X-2378). 

Galletly, Robert; Wagner, R. J.; Wang, G. J.; Zins, John. Random Vibration and Acoustic Analysis Using ARI RANDOM, a NASTRAN Post Processor, MSC/NASTRAN Users' Conf. Proc., Paper No. 26, March, 1984. 

Gallo, Michael; Mittal, S. A New NASTRAN Capability for Data Reduction, Thirteenth NASTRAN Users' Colloq., pp. 177-187, May, 1985, (NASA CP-2373). 

Garnier, C.; Gauthier, J.; Passeron, L. A NASTRAN Post Processor for the Computation of Flexible Spacecraft Simulation Parameters, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. 

Genberg, Victor. Shape Function Interpolation of 2D and 3D Finite Element Results, The MSC 1993 World Users' Conf. Proc., Paper No. 47, May, 1993. 

Giles, Gary L.; Blackburn, Charles L. Procedure for Efficiently Generating, Checking, and Displaying NASTRAN Input and Output Data for Analysis of Aerospace Vehicle Structures, NASTRAN: Users' Exper., pp. 679-696, September, 1971, (NASA TM X-2378). 

Gingerich, Jeffrey Z.; Abe, Marv M.; Vinecore, Randall L.; Romans, Gary J.; Ratihn, Barry M. A Stand-Alone Interactive Graphics Finite Element Modeling System, Sixth NASTRAN Users' Colloq., pp. 327-340, October, 1977, (NASA CP-2018). 

Grasso, A.; Tomaselli, L. Whirling Speed Analysis of Multispool Systems, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1984. 

Gratke, Steve. An Evolution from NASPLOT to Graphics, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Graves, Roger W.; Anderson, Ted; Zarda, P. Richard. Utility Programs at Martin Marietta Which Supplement MSC/NASTRAN and SDRC-SUPERTAB, The 1989 MSC World Users Conf. Proc., Vol. II, Paper No. 59, March, 1989. 

Gray, W. H.; Baudry, T. V. Using PAFEC as a Preprocessor for COSMIC/NASTRAN, Eleventh NASTRAN Users' Colloq., pp. 21-32, May, 1983. 

Grieger, I. INGA - An Interactive Graphical Pre- and Post-Processor, NASTRAN User's Conf., May, 1979. 

Griffis, Hugh. Automatic Dynamic Aircraft Modeler (ADAM) for the Computer Program NASTRAN, Thirteenth NASTRAN Users' Colloq., pp. 188-198, May, 1985, (NASA CP-2373). 

Guyan, Robert J. NASTRAN Data Deck Generation on the PC, Fourteenth NASTRAN Users' Colloq., pp. 61-72, May, 1986, (NASA CP-2419). 

Gyekenyesi, J. P. SCARE: A Postprocessor Program to MSC/NASTRAN for Reliability Analysis of Structural Ceramic Components, 31st International Gas Turbine Conf. and Exhibit, 1986, (ASME 86-GT-34). 

Hamilton, C. Hayden, III. The Advent of Color Graphics in Engineering Design and Analysis: a Coming Dimension to Pre- and Postprocessing of F.E.M., Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1982. 

Hanlein, Stuart L. A Simplified Modal Plotting Technique for the Representation of Complex Structural Models, NASTRAN: Users' Exper., pp. 697-706, September, 1973, (NASA TM X-2893). 

Harada, Yoshiaki. Pre/Post Processor -FEMAS- for Element Library of MSC/NASTRAN, The Fourth MSC/NASTRAN User's Conf. in Japan, October, 1986, in Japanese. 

Hauser, H.; Matheron, G. Presentation of MSC/NASTRAN Compatible Preprocessor for Modeling Structures Made of Composite Materials, Proc. of the 17th MSC Eur. Users' Conf., Paper No. 22, September, 1990. 

Heerschap, M. E. An Interactive Computer Aided Design System for Cut-Outs in Pressurized Aircraft Fuselages, MSC 1995 World Users' Conf. Proc., Paper No. 43, May, 1995. 

Hempel, H. 3-Dimensional Stress Analysis of Gas Turbine Wheels-Strategy for Generating the Finite Element Model and Thermal Boundary Conditions Automatically, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. 

Herendeen, David L. The Graphical Analysis Structural Processor, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Herendeen, David L.; San Marco, Jeffery. Introduction to the GRASP System, Proc. of the Conf. on Finite Element Methods and Technology, Paper No. 18, March, 1981. 

Herendeen, David L. The GRASP Interactive System, NASTRAN User's Conf., June, 1981. 

Herendeen, David L. Interactive Pre- and Post-Processors for Finite Element Computer Programs, AIAA Aircraft Systems and Technology Conf., August, 1981. 

Herendeen, David L. Future MSC/GRASP Developments, MSC/NASTRAN Users' Conf. Proc., Paper No. 22, March, 1982. 

Herness, E. D.; Kriloff, H. Z. NASTRAN Pre- and Postprocessors Using Low-Cost Interactive Graphics, NASTRAN: Users' Exper., pp. 449-460, September, 1975, (NASA TM X-3278). 

Herness, Ervin D.; Robl, Frank J. MSC/NASTRAN Plotting Interface to Intelligent Systems, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Hirano, Tohru. Visual Evaluation Method for the Vibration Analysis Utilizing a Super Intelligent Color Graphic Display, The First MSC/NASTRAN User's Conf. in Japan, October, 1983, in Japanese. 

Hirt, Eric F.; Fox, Gary L. Recent Developments of NASTRAN Pre- and Post-Processors: Response Spectrum Analysis (RESPAN) and Interactive Graphics (GIFTS), Tenth NASTRAN Users' Colloq., pp. 18-44, May, 1982, (NASA CP-2249). 

Hitaka, Ryousi. ISAS (General Purpose Pre-Post Processor), The Second MSC/NASTRAN User's Conf. in Japan, October, 1984, in Japanese. 

Ice, Malcolm W. NASTRAN User Interfaces-Automated Input Innovations, NASTRAN: Users' Exper., pp. 669-678, September, 1971, (NASA TM X-2378). 

Ice, Malcolm W.; Robl, Frank J. NASTRAN Input Data Preparation Using the FEM Editor, MSC/NASTRAN Users' Conf. Proc., Paper No. 19, March, 1982. 

Ingle, R. L. Integration of Dedicated VAX/NASTRAN and Distributed Interactive Graphics, Proc. of the Conf. on Finite Element Methods and Technology, Paper No. 19, March, 1981. 

Jakovich, John; Van Benschoten, John. SDRC SUPERTAB Interactive Graphics as a Front-End to MSC/NASTRAN Dynamic Analysis, Proc. of the MSC/NASTRAN Users' Conf., March, 1979. 

Jakovich, John. Finite Element Analysis: Advanced Graphics Software, Proc. of the Conf. on Finite Element Methods and Technology, Paper No. 17, March, 1981. 

Jones, Gary K.; McEntire, Kelly J. NPLOT: An Interactive Plotting Program for NASTRAN Finite Element Models, Thirteenth NASTRAN Users' Colloq., pp. 110-132, May, 1985, (NASA CP-2373). 

Kamel, H. A.; Mobley, Anton V.; Nagaraj, Ben; Watkins, K. W. Pre- and Post-Processing for Cosmic/NASTRAN on Personal Computers and Mainframes, Fourteenth NASTRAN Users' Colloq., pp. 73-102, May, 1986, (NASA CP-2419). 

Kane, J.; Propen, M. Incorporation of MSC/NASTRAN, Interactive Graphics and Data Management Techniques for Computer Aided Design of Gas Turbine Components, Proc. of the MSC/NASTRAN Users' Conf., March, 1979. 

Katoh, Shunichi. Adding Stress Plot Function to NASTRAN, Seventh NASTRAN Users' Colloq., pp. 25-32, October, 1978, (NASA CP-2062). 

Katow, M. Smoot; Cooper, Barry M. NASTRAN Data Generation and Management Using Interactive Graphics, NASTRAN: Users' Exper., pp. 399-406, September, 1972, (NASA TM X-2637). 

Kawashima, Masao. Development of Post Processing Program -HULLOS- for Ship's Hull Structure Stress Analysis, The Fourth MSC/NASTRAN User's Conf. in Japan, October, 1986, in Japanese. 

Kayrak, Cuneyd; Ozsoy, Tulga. Isoparametric 3-D Finite Element Mesh Generation Using Interactive Computer Graphics, Thirteenth NASTRAN Users' Colloq., pp. 172-176, May, 1985, (NASA CP-2373). 

Kelly, Barbara M. The NASTRAN Contour Plotter, NASTRAN: Users' Exper., pp. 385-398, September, 1972, (NASA TM X-2637). 

Kung, Shyh-Yuan. MESHBASE-an Interactive Graphics Processor for 3-D Finite Element Models (Meshes), The 1989 MSC World Users Conf. Proc., Vol. II, Paper No. 55, March, 1989. 

Kuusinen, Loren R. Understanding the NASTRAN Structure Plotter, NASTRAN: Users' Exper., pp. 475-492, September, 1975, (NASA TM X-3278). 

Lambert, J. L. GRAFAX Interactive Pre- and Post-Processor for MSC/NASTRAN, Proc. of the MSC/NASTRAN Users' Conf., March, 1979. 

Larkin, L. A. Solve Local Collapse-A. O. Smith GRAFAX, Proc. of the MSC/NASTRAN Users' Conf., March, 1979. 

Levy, Roy. A NASTRAN Postprocessor for Structural Modification Reanalysis, NASTRAN: Users' Exper., pp. 737-748, September, 1971, (NASA TM X-2378). 

Lipman, Robert R. Two Interactive Graphics Postprocessors for NASTRAN, Thirteenth NASTRAN Users' Colloq., pp. 152-163, May, 1985, (NASA CP-2373). 

Lipman, Robert R. Computer Animation of Modal and Transient Vibrations, Fifteenth NASTRAN Users' Colloq., pp. 111-117, August, 1987, (NASA CP-2481). 

Lorensen, William E. Interactive Graphics Support for NASTRAN, Sixth NASTRAN Users' Colloq., pp. 305-326, October, 1977, (NASA CP-2018). 

Lund, Charles. The SUPERMESH: Run-Time Meshing from Coarse CAD Models Using MSGMESH, The MSC 1991 World Users' Conf. Proc., Vol. II, Paper No. 42, March, 1991. 

Lundgren, Gert. LapCAD3-A Modeling Program for MSC/pal and MSC/NASTRAN, The 1989 MSC World Users Conf. Proc., Vol. II, Paper No. 54, March, 1989. 

Lundgren, Gert M. LapCAD, a MSC/NASTRAN Pre/Postprocessor on the Macintosh, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 36, March, 1990. 

Lundgren, Gert M. LapCAD, a MSC/NASTRAN and MSC/pal 2 Front End on the Personal Computer, The MSC 1991 World Users' Conf. Proc., Vol. II, Paper No. 63, March, 1991. 

Lundgren, Gert. Integrated FEM/FEA on POWERMAC, MSC 1995 World Users' Conf. Proc., Paper No. 45, May, 1995. 

Lux, Louis E. Composite Analysis Using SDRC SUPERTAB and MSC/NASTRAN, The MSC 1988 World Users Conf. Proc., Vol. I, Paper No. 12, March, 1988. 

Mackerle, Jaroslav. Review of Pre- and Postprocessor Programs Included in the Major Commercial General Purpose Finite Element Packages, Advances in Engineering Software, Vol. 5, No. 1, pp. 43-53, January, 1983. 

MacNeal, Richard H. Future MSC/GRASP Developments, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1982. 

Maekawa, Seiyou. Generation of FEM Model of Various Fluid Machine by 3-D CAD, The Fourth MSC/NASTRAN User's Conf. in Japan, October, 1986, in Japanese. 

Massman, J. PREMAS-A System for Generation of Complete Input Data for Various Finite Element Systems Like MSC/NASTRAN, NASTRAN User's Conf., April, 1978. 

McDonough, John R. NASTRAN Plotting Capabilities, NASTRAN: Users' Exper., pp. 709-636, September, 1971, (NASA TM X-2378). 

Meyer, Keith J.; Rahmann, Steven. Interactive Laminate Postprocessing of NASTRAN Structural Analysis, The MSC 1987 World Users Conf. Proc., Vol. I, Paper No. 20, March, 1987. 

Meyer, Keith J. Interactive Cross-Section Design Using PATRAN and MSC/NASTRAN, The MSC 1988 World Users Conf. Proc., Vol. I, Paper No. 13, March, 1988. 

Mikami, Kouichi; Iwahashi, Yoshio; Murakawa, Osamu; Sakato, Tsuneo. Finite Element Mesh Generation in the Framework of an Expert System (Pre-Post Program SCOPE-Interface to MSC/NASTRAN), The 1989 MSC World Users Conf. Proc., Vol. I, Paper No. 10, March, 1989. 

Mittal, S.; Gallo, M.; Wang, T. An Unusual Application of NASTRAN Contour Plotting Capability, Thirteenth NASTRAN Users' Colloq., pp. 164-171, May, 1985, (NASA CP-2373). 

Morgan, E. Microcomputer Pre- and Postprocessing for MSC/NASTRAN and MSC/pal 2 Using MTAB Software, The MSC 1987 World Users Conf. Proc., Vol. II, Paper No. 6, March, 1987. 

Nemeth, Noel N.; Manderscheid, Jane M.; Gyekenyesi, John P. Ceramics Analysis and Reliability Evaluation of Structures (CARES): Users and Programmers Manual, National Aeronautics and Space Administration, August, 1990, (NASA TP-2916). 

Newton, P.; Sodha, R. An Efficient Post-Processing Environment for MSC/NASTRAN or Other Analysis Systems, NASTRAN User's Conf., May, 1979. 

Norton, Robert L. Interactive Plotting of NASTRAN Data on Microcomputers, Fifteenth NASTRAN Users' Colloq., pp. 98-110, August, 1987, (NASA CP-2481). 

Ohara, Tooru; Ando, Masao. Interactive Pre- and Post-Processor for MSC/NASTRAN, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Park, S.; Washam, C. J. Drag Method as a Finite Element Mesh Generation Scheme, Proc. of the MSC/NASTRAN User's Conf., March, 1979. 

Park, Seungwoo. UNISTRUC-A Graphics Pre/Post Processor for Finite Element Analysis Programs, Proc. of the MSC/NASTRAN User's Conf., March, 1979. 

Parker, G. R.; Lee, J. M. Computer Aided Engineering and Finite Element Applications to Weapon Systems, Proc. of the MSC/NASTRAN Eur. Users' Conf., Paper No. 12, May, 1984. 

Parker, Grant. Gear Analysis Using the MSC/NASTRAN Cyclic Symmetry Approach with Enhanced Graphics, MSC/NASTRAN Users' Conf. Proc., Paper No. 5, March, 1984. 

Peltzman, Alan N. The Application of NASCAD as a NASTRAN Pre- and Post-Processor, Fifteenth NASTRAN Users' Colloq., pp. 59-71, August, 1987, (NASA CP-2481). 

Peterson, L. A Status Report on MSGMESH, NASTRAN User's Conf., April, 1978. 

Petteno, L.; Gazziero, M.; Zaghini, R.; Marcon, D. An Integrated Procedure for MSC/NASTRAN Pre- and Post- Processing (GRASFE), Proc. of the 15th MSC/NASTRAN Eur. Users' Conf., October, 1988. 

Prince, A.; Perron, C.; Desy, P. Loads Post-Processing for MSC/NASTRAN, The MSC 1991 World Users' Conf. Proc., Vol. I, Paper No. 10, March, 1991. 

Pusch, C. Status Report on the FE Graphics Package FEMGEN/FEMVIEW, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1982. 

Raasch, I. The Application of Intersecting Surface Algorithm to Mesh Generation Programs, NASTRAN User's Conf., May, 1979. 

Raibstein, A. I.; Emil, S.; Pipano, A. A Postprocessor System for the Data Reduction and Post Analysis of NASTRAN Results, NASTRAN: Users' Exper., pp. 555-580, October, 1976, (NASA TM X-3428). 

Raibstein, A. I.; Pipano, A. RINA-An Interactive System for the Rapid Interpretation of NASTRAN Results, Sixth NASTRAN Users' Colloq., pp. 341-357, October, 1977, (NASA CP-2018). 

Ranger, Ken. Finite Element Analysis on the Macintosh Personal Computer, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 35, March, 1990. 

Ranson, M. J.; Healy, N.; Haley, C. H. Analysis Results Processing Software Systems Built Using MSC/ACCESS, Proc. of the 19th MSC European Users' Conf., Paper No. 5, September, 1992. 

Reynolds, Robert J. Production of Motion Pictures of a Continuously Deforming Structure Using NASTRAN, NASTRAN: Users' Exper., pp. 647-658, September, 1971, (NASA TM X-2378). 

Riley, Erin; Webster, James L.; Overbye, Vern D. AOS/GRAFAX Interactive Processing of MSC/NASTRAN Superelements, Proc. of the Conf. on Finite Element Methods and Technology, Paper No. 22, March, 1981. 

Robl, Frank J.; Ice, Malcolm W. BCS Implementation of the SDRC Graphics System, MSC/NASTRAN Users' Conf. Proc., Paper No. 21, March, 1982. 

Ross, Robert W. Prediction and Elimination of Resonance in Structural Steel Frames, The MSC 1988 World Users Conf. Proc., Vol. II, Paper No. 45, March, 1988. 

Ryoichi, Mishima; Myojin, Akinori. IG/OG Program for Generating and Displaying NASTRAN Input and Output Data, Seventh NASTRAN Users' Colloq., pp. 131-146, October, 1978, (NASA CP-2062). 

Sainsbury-Carter, J. B.; Conaway, John H. NASTRAN Data Generation of Helicopter Fuselages Using Interactive Graphics, NASTRAN: Users' Exper., pp. 661-678, September, 1973, (NASA TM X-2893). 

Sauer, G.; Salgado, N. BARRAS-A Combined Interactive/Batch System for Bar Type Element Analysis, Proc. of the 15th MSC/NASTRAN Eur. Users' Conf., October, 1988. 

Schneermann, M. COMDAT-A Preprocessor for Material and Element Data Generation for Composite Materials, NASTRAN User's Conf., May, 1979. 

Schulze-Schwering, Werner P.; Raasch, Ingo. Efficient Data Recovery and Postprocessing with NASTRAN, NASTRAN User's Conf., June, 1981. 

Schwab, H. L.; Caffrey, J.; Lin, J. Fatigue Analysis Using Random Vibration, MSC 1995 World Users' Conf. Proc., Paper No. 17, May, 1995. 

Shephard, Mark S. Automated Finite Element Modeling: How Close Is It?, The MSC 1987 World Users Conf. Proc., Vol. I, Paper No. 8, March, 1987. 

Sherman, Mark A. Multi Disciplinary Analysis in MSC/NASTRAN with FEMAP, MSC 1995 World Users' Conf. Proc., Paper No. 44, May, 1995. 

Simon-Weidner, J. Pre- and Postprocessing with STRUGEN, Coloured Interpretation of NASTRAN Results, Proc. of the MSC/NASTRAN Eur. Users' Conf., May, 1984. 

Smith, Willianna W. A Special NASTRAN Program for Input Checking and Undeformed Structure Plotting, NASTRAN: Users' Exper., pp. 559-568, September, 1971, (NASA TM X-2378). 

Smith, Willianna W. An Interactive NASTRAN Preprocessor, NASTRAN: Users' Exper., pp. 641-660, September, 1973, (NASA TM X-2893). 

Srikanta, N. S. MESHGEN: A Mesh Generating System for NASTRAN, MSC/NASTRAN Users' Conf., March, 1978. 

Stanton, Edward L. An Automated Data Generator for NASTRAN, Sixth NASTRAN Users' Colloq., pp. 419-434, October, 1977, (NASA CP-2018). 

Steinmuller, G.; Wamsler, M. Special Procedures for Pre- and Post-Processing, Proc. of the MSC/NASTRAN Eur. Users' Conf., June, 1983. 

Tischler, Victoria A.; Copenhaver, Elizabeth M.; Less, Michael C.; Manuel, Susan. CADS-A Computer Aided Design System, Thirteenth NASTRAN Users' Colloq., pp. 199-224, May, 1985, (NASA CP-2373). 

Tuda, Masaaki. Optimization Analysis of Auto Body Using High Accuracy Sensitivity Analysis, The Fourth MSC/NASTRAN User's Conf. in Japan, October, 1986, in Japanese. 

Walker, D. C.; Chander, Suresh. NASTRAN Analysis Made Easier with UNISTRUC II, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Walker, Donald C. Scanning NASTRAN Output Data for Maximum and Minimum Values, NASTRAN: Users' Exper., pp. 461-474, September, 1975, (NASA TM X-3278). 

Wallace, Dolores R.; McKee, James M.; Hurwitz, Myles M. The GPRIME Approach to Finite Element Modeling, Eleventh NASTRAN Users' Colloq., pp. 33-45, May, 1983. 

Walsh, Joseph L.; Jones, Martin. Flexible Results Evaluation, The MSC 1991 World Users' Conf. Proc., Vol. II, Paper No. 61, March, 1991. 

Walsh, Joseph L. The Role of Geometrically Associative Analysis Modeler in the Design Optimization Process, The MSC 1992 World Users' Conf. Proc., Vol. II, Paper No. 33, May, 1992. 

Walsh, Joseph L. Exposing the Myths of Design to Analysis Data Exchange, The MSC 1993 World Users' Conf. Proc., Paper No. 60, May, 1993. 

Walsh, Joseph L. Topology Based Analysis Modeling and Parameter Driven Analysis Models in FEGS FAM 3.0, The MSC 1993 World Users' Conf. Proc., Paper No. 61, May, 1993. 

Watabe, Kohichi. NASPAC (NASTRAN Post Processing Package), The Second MSC/NASTRAN User's Conf. in Japan, October, 1984, in Japanese. 

Webster, James L.; Overbye, Vern D. AOS/GRAFAX Interactive Processing of MSC/NASTRAN Dynamic Results, MSC/NASTRAN Users' Conf. Proc., Paper No. 20, March, 1982. 

Wegienka, Alan J. Introduction to ConceptStation, The 4th MSC Taiwan Users' Conf., Paper No. 5, November, 1992. 

Wegienka, Alan. Introduction to ConceptStation, Proc. of the Third MSC/NASTRAN Users' Conf. in Korea, November, 1992. 

White, Gil. A New Approach to Finite Element Modeling, Analysis and Post-Processing, Fifteenth NASTRAN Users' Colloq., pp. 56-59, August, 1987, (NASA CP-2481). 

Wigginton, Richard T.; LeBlanc, Andrew; Vasani, Jijay. NASTRAN Binary Output Processor, The MSC 1990 World Users Conf. Proc., Vol. II, Paper No. 33, March, 1990. 

Wilson, M. R. A Post-Processing System for Finite Element Analyses, Proc. of the Conf. on Finite Element Methods and Technology, March, 1980. 

Wunner, J.; Dirschmid, W.; Huber, K. F.E.M. Post Processing Program for Analyses of Car Body Structures, Proc. of the MSC/NASTRAN Eur. Users' Conf., April, 1985. 

Yang, Howard J. Sorted Output in MSC/NASTRAN, Proc. of the Conf. on Finite Element Methods and Technology, Paper No. 4, March, 1981. 

Zemer, David T. NORCK: A NASTRAN Module to Check Input Data and Element Geometry, Sixth NASTRAN Users' Colloq., pp. 65-74, October, 1977, (NASA CP-2018). 

Zimmermann, K. J. Experiences Gained in Interactive Use of NASTRAN, NASTRAN User's Conf., June, 1981. 

Zins, J. Random Vibration and Acoustic Analysis Using ARI RANDOM a NASTRAN Postprocessor, Proc. of the MSC/NASTRAN Eur. Users' Conf., Paper No. 4, May, 1984.