1. Bergsma, O.K. and Huisman, J. “Deep Drawing of Fabric Reinforced Thermoplastics,” in Brebbia, C., et al., CAD in Composite Material Technology (Southampton, Computational Mechanics, 1988).

2. Bergsma, O.K. Deep Drawing of Fabric Reinforced Thermoplastics: Simulation and Experiment (Delft University of Technology, Department of Aerospace Engineering).

3. Calladine, C. Theory of Shell Structures, Chapter 5.

4. Heisey, F.L., et al. “Three-Dimensional Pattern Drafting,” Textile Research Journal, November 1990, pp. 690-696.

5. Collier, J.R., Collier, B.J., O’Toole, G. and Sargand, S.M. “Drape Prediction by Means of Finite-Element Analysis,” J. Text. Inst., 1991, Vol. 82, No. 1, pp. 96-107.

6. Heisey, F.L., and Haller, K.D. “Fitting Woven Fabric To Surfaces in Three Dimensions,” J. Text. Inst., 1988, No. 2, pp. 250-263.

7. Hinds, B.K., McCartney, J., and Woods ,G. “Pattern Development for Three Dimensional Surfaces” (Queens University Belfast, Department of Mechanical and Manufacturing Engineering).

8. Kawabata, S. The Standardization and Analysis of Hand Evaluation, 2nd ed., (Osaka, Japan, The Textile Machinery Society of Japan, 1980).

9. Mack, C., and Taylor, H.M. “The Fitting of Woven Cloth to Surfaces,” J.Text. Inst., 1956, No. 47, pp. T477-88.

10. Mallon, P.J., O’Bradaigh, C.M., and Pipes, R.B. “Polymeric Diaphragm Forming of Complex-Curvature Thermoplastic Composite Parts,” Composites, Vol. 20, No. 1, Jan. 1989, pp.48-56.

11. Monaghan, M.R., Mallon, P.J., O’Bradaigh, C.M., and Pipes, R.B. “The Effect of Diaphragm Stiffness on the Quality of Diaphragm Formed Thermoplastic Composite Components,” The Journal of Thermoplastic Composite Materials, Vol. 3, July 1990, pp.202-215.

12. Okine, R.K. “Analysis of Forming Parts from Advanced Thermoplastic Composite Sheet Materials,” The Journal of Thermoplastic Composite Materials, Vol. 2, Jan. 1989, pp.50-77.

13. Potter, K.D. “The Influence of Accurate Stretch Data for Reinforcements on the Production of Complex Structural Mouldings -- Part 1. Deformation of Aligned Sheets & Fabrics,” Composites, July 1979, pp.161‑167.

14. Potter, K.D. “The Influence of Accurate Stretch Data for Reinforcement on the Production of Complex Structural Mouldings -- Part 2. Deformation of Random Mats,” Composites, July 1979, pp. 168-173.

15. Potter, K.D. Deformation Mechanisms of Fibre Reinforcements and Their Influence on the Fabrication of Complex Structural Parts (London, Controller HMSO, 1980).

16. Robertson, R.E., et al. “Fiber Rearrangements During the Moulding of Continuous Fiber Composites. 1: Flat Cloth to a Hemisphere,” Polymer Composites, July 1981, Vol. 2, No. 3, pp. 126-131.

17. Skelton, J. Shear Of Woven Fabrics (Dedham MA, USA, FRL, 1979).

18. Smiley, A.J., and Pipes, R.B. “Analysis of the Diaphragm Forming of Continuous Fiber Reinforced Thermoplastics,” The Journal of Thermoplastic Composite Materials, Vol. 1, Oct. 1988, pp. 298-321.

19. Stubbs, N., and Fluss, H. “A Space-truss Model for Plain-Weave Coated Fabrics,” Appl. Math. Modeling, Vol. 4, Part 1, Feb. 1980, pp. 51-58.

20. Tam, A.S., and Gutowski, T. “Ply-Slip During the Forming of Thermoplastic Composite Parts,” Journal of the ASCE Engineering Mechanics Division, Vol. 104, Part 5, Oct, 1978.

21. Testa, R.B., Stubbs, N., and Spillers, W.R. “Bilinear Model For Coated Square Fabrics,” The Journal of the ASCE Engineering Mechanics Division, Vol. 104, Part 5, Oct. 1978, pp. 1027-1042.

22. Van Der Weeen, F. “Algorithms For Draping Fabrics on Doubly-Curved Surfaces,” International Journal for Numerical Methods in Engineering, Vol. 31, 1991, pp. 1415-1426.

23. Van West, B.P., et al. The Draping and Consolidation of Commingled Fabrics (Delaware USA, Center for Composite Materials and Dept. of Mechanical Engineering, University of Delaware, 1990).

24. Wormersley, J.R. “The Application of Differential Geometry to the Study of the Deformation of Cloth Under Stress,” J. Text. Inst., 1937, pp.T97-112.