XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX''"> Examples of Modifying the Database
The following session file is an example of how the commands described in this chapter can be used to load analysis code specific data about a new analysis code into a Patran database.
codeindent10 1: “John Code”, a hypothetical structural analysis code
The following session file loads the open database with the analysis code definitions for “John Code”, a hypothetical and simplistic structural analysis code. This example is delivered with Patran in the $P3_HOME/customization directory under the name “load_johncode.ses.” In order to run this session file, follow these steps:
1. Within Patran, open the target database. This database can be devoid of analysis code examples, like “base.db” or can already contain analysis code definitions, like “template.db”.
2. Run the $P3_HOME/customization/load_johncode.ses session file through the “Play Session File” functionality on the main “File” menu.
$ Initialize variables
INTEGER status, bar_code, plate_code, solid_code
$ Define new analysis code
status = db_create_analysis_code(20001, “John Code”, “.in”, “.out”, 1, [1], 1 )
!‘status‘
$ Define the generic element types, element properties and material properties
load_generics()
$ Get PATRAN topology codes
status = fem_get_patran25_etop(2,2,bar_code)
!‘status‘
status = fem_get_patran25_etop(4,4,plate_code)
!‘status‘
status = fem_get_patran25_etop(8,8,solid_code)
!‘status‘
$ Define element types
status = db_create_selected_etype_wc ( 1, 7, 13, 42, 1, 2, bar_code, 20, 1, 1, 36, 1 )
!‘status‘
status = db_create_selected_etype_wc(1,7,27, 42, 1, 2, bar_code, 20, 1, 1, 36, 2 )
!‘status‘
status = db_create_selected_etype_wc ( 1, 7, 1, 24, 1, 1, plate_code, 19, 1, @
1, 54, 1 )
!‘status‘
status = db_create_selected_etype_wc( 1,7,1,24,1,3, plate_code, 19,1,4,54, 2)
!‘status‘
status = db_create_selected_etype_wc ( 1, 7, 1, 30, 1, 1, solid_code, 15, 1, 1, 71, 5)
!‘status‘
$ Re-create element type summary table
status = elementprops_def_create.make_elem_summary()
!‘status‘
$ Define element property words
status = db_create_allowable_phys_prop( 7, 13, “Material Reference,” 1, @
[5,0,0,0,0,0,0,0,0,0], 5, 0, “ ”, “ ”, “ ”)
!‘status‘
status = db_create_allowable_phys_prop( 7, 1027, “Outside Radius,” 1, @
[1,0,0,0,0,0,0,0,0,0], 1, 0, “ ”, “prop > 0.”, “ ” )
!‘status‘
status = db_create_allowable_phys_prop( 7, 1, “Cross Sectional Area,” 1, @
status = db_create_matl_prop_alias ( 7, 1, 1, 2, 503, “Stress/Strain Curve,” 3 )
!‘status‘
$ Define the material records
status = db_create_allowable_matl_prop ( 7, 1, 1, 1, [0,0,0,0,0], [1, 2, 5, 16, 24, 30], 6 )
!‘status‘
status = db_create_allowable_matl_prop ( 7, 1, 1, 2, [0,0,0,0,0], [503], 1 )
!‘status‘
$ Assign the already existing definitions for FORCE and DISPLACEMENT
$ to John Code
status = db_add_lbc_type_for_ac( 7, 6 )
!‘status‘
status = db_add_lbc_type_for_ac( 7, 7 )
!‘status‘
$ Define MPC types Explicit, Rigid(Fixed), Rigid(Pinned)
status = db_create_mpc_type_def ( 41, “Explicit,” FALSE, FALSE, TRUE, “Constant Term,” @
FALSE, FALSE, TRUE, 1, 1, 1, 1, TRUE, TRUE, 0, 1, 1, 1 )
!‘status‘
status = db_create_mpc_type_def ( 42, “Rigid(Fixed),” FALSE, FALSE, FALSE, “ ”, @
FALSE, FALSE, FALSE, 0, 1, 0, 1, FALSE, FALSE, 1, 1, 0, 1 )
!‘status‘
status = db_create_mpc_type_def ( 43, “Rigid(Pinned),” FALSE, FALSE, FALSE, “ ”, @
FALSE, FALSE, FALSE, 0, 1, 0, 1, FALSE, FALSE, 1, 1, 0, 1 )
!‘status‘
$ Associate MPC types with the new analysis code
status = db_create_valid_mpc_type ( 41, 7, 1, 6, [1, 2, 3, 4, 5, 6] )
!‘status‘
status = db_create_valid_mpc_type ( 42, 7, 1, 0, [0] )
!‘status‘
status = db_create_valid_mpc_type ( 43, 7, 1, 0, [0] )
!‘status‘
$ Define generic element property verification parameters
status = db_set_elem_verification_parms ( “John Code”, 1, 5.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 2, 30.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 3, 5.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 4, 30.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 5, 7.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 6, 0.8 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 7, 5.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 8, 30.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 9, 0.15 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 10, 30.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 11, 5.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 12, 30.0 )
!‘status‘
status = db_set_elem_verification_parms ( “John Code”, 13, 0.8 )