SAMCEF > Read Results > Translation Parameters
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX''">XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX''">   
Translation Parameters
This form is used to control reading data from an SAMCEF results file.
 
Depending on the selected object (Result Entities, Model, or Both), the model options are the following:
 
Note:  
Set the default language in the “settings.pcl” file (Français or English).
OBJECT
DESCRIPTION
Check Model
(Results Entities)
The translator will verify that the nodes list and the elements list are the same in MSC Patran and in SAMCEF files. If not, the execution is stopped.
NoCheck Model
(Results Entities)
No check is performed.
Database
(Model Data or Both)
The translator will verify that the nodes and the elements exist in the MSC Patran database. If not, the model is reloaded from the SAMCEF files into the MSC Patran database.
If the model is present in the MSC Patran database, the compatibility is checked, as in the option Check Model.
Neutral
(Model Data)
In all cases, the model is translated from the SAMCEF files to a MSC Patran 2.5 Neutral file format: ‘problem’.out.