flds_beam_spline_create | ( spline_name, spline_method, dimension, num_struc_nodes, struc_node_ids, aero_type, num_aero_elems, aero_elem_ids, bdy_surf_id, ref_cid, linear, x_rotation, y_rotation, z_rotation, xy_tflex, zy_tflex ) |
Description: | ||
This function creates the Beam Splines given the information available on the SPLINE5 card. | ||
Input: | ||
STRING | spline_name | This value specifies the name of the Spline. |
INTEGER | spline_method | This value specifies the spline method. (1=GENERAL, 2=DISPLACEMENT, 3=FORCE) |
INTEGER | dimension | This value specifies the dimension value. (1=1D, 2=2D) |
INTEGER | num_struc_nodes | This value specifies the number of Structural nodes specified. |
INTEGER | struc_node_ids() | This value specifies the array of Structural node ids. |
INTEGER | aero_type | This value specifies the type of the Aero data. (1=BODY, 2=SURFACE) |
INTEGER | num_aero_elems | This value specifies the number of Aero elements specified. |
INTEGER | aero_elem_ids() | This value specifies the array of Aero element ids. |
INTEGER | bdy_surf_id | This value specifies the ID of the Body/Surface that the selected Aero elements belong to. |
INTEGER | ref_cid, | This value specifies the Reference CID value. |
REAL | linear | This value specifies the Linear Attach Flexibility value. |
REAL | x_rotation | This value specifies the X-Rotation value. |
REAL | y_rotation | This value specifies the Y-Rotation value. |
REAL | z_rotation | This value specifies the Z-Rotation value. |
REAL | xy_tflex | This value specifies the XY Torsion Flexibility value. |
REAL | zy_tflex | This value specifies the ZY Torsion Flexibility value. |
Output: | ||
INTEGER | <Return Value> | This function returns a value of 0 when executed successfully and a non zero value to indicate an error. |
Error Conditions: | ||
3001003 | %A% is an invalid Load Case Type. Must be Static or Time Dependent. | |
13000085 | Cursor not open | |
13000117 | The query specified has completed | |
14000001 | LpGetHeapSpace: Allocated heapspace is exhausted | |
14000003 | LpSublistType: No sublist filter bits are set on invocation | |
14000004 | LpSublistType: I am being invoked with a NULL list | |
14000005 | LpSublistType: In the list being used, the current sublist has a nonatomic CAR | |
14000006 | LpSublistType: In the list being used, the current geometry sublist is unclassifiable | |
14000007 | LpSublistType: In the list being used, the current finite element sublist is unclassifiable | |
14000008 | LpSublistType: In the list being used, the current token sublist is unclassifiable | |
14000009 | LpSublistType: In the list being used, the current sublist is unclassifiable | |
14000010 | LpSublistType: In the list being used, the current sublist does not match the sublist filter | |
14000014 | LpSublistNext: Attempt to proceed past last sublist in current list | |
14000015 | LpSublistNext: End of current list has been reached | |
14000201 | Invalid output string specified for call | |
26001010 | Load/BC Definition %A% does not exist. | |
26002010 | Load/BC Name is blank. Input a Load/BC Name. | |
26002011 | Load/BC Name %A% is too long. Input 31 characters or less. | |
26002121 | %I% is an invalid number of application regions for the specified Load/BC definition. | |
26002134 | The list %A% contains FEM or unknown GEOmetric entities. All the entities in the application region(s) must be GEOmetric. | |
26002135 | The list %A% contains GEOmetric or unknown FEM entities. All the entities in the application region(s) must be FEM. | |
26002136 | %A% is an invalid Geometry Filter. Must be Geometry or FEM. | |
26002200 | There was no data input for this Load/BC Set. | |
26002201 | %I% is an invalid number of input data fields for the specified Load/BC definition. | |
26006001 | Database error encountered: %I%. Call PDA Hotline. | |
1 | This is am internal status condition. There is no corresponding status message in the message database. |
flds_beam_spline_modify | ( spline_name, new_spline_name, spline_method, dimension, num_struc_nodes, struc_node_ids, aero_type, num_aero_elems, aero_elem_ids, bdy_surf_id, ref_cid, linear, x_rotation, y_rotation, z_rotation, xy_tflex, zy_tflex ) |
Description: | ||
This function modifies the Beam Splines given the information available on the SPLINE5 card. | ||
Input: | ||
STRING | spline_name | This value specifies the name of the Spline. |
STRING | new_spline_name | This value specifies the new Spline name. |
INTEGER | spline_method | This value specifies the spline method. (1=GENERAL, 2=DISPLACEMENT, 3=FORCE) |
INTEGER | dimension | This value specifies the dimension value. (1=1D, 2=2D) |
INTEGER | num_struc_nodes | This value specifies the number of Structural nodes specified. |
INTEGER | struc_node_ids() | This value specifies the array of Structural node ids. |
INTEGER | aero_type | This value specifies the type of the Aero data. (1=BODY, 2=SURFACE) |
INTEGER | num_aero_elems | This value specifies the number of Aero elements specified. |
INTEGER | aero_elem_ids() | This value specifies the array of Aero element ids. |
INTEGER | bdy_surf_id | This value specifies the ID of the Body/Surface that the selected Aero elements belong to. |
INTEGER | ref_cid, | This value specifies the Reference CID value. |
REAL | linear | This value specifies the Linear Attach Flexibility value. |
REAL | x_rotation | This value specifies the X-Rotation value. |
REAL | y_rotation | This value specifies the Y-Rotation value. |
REAL | z_rotation | This value specifies the Z-Rotation value. |
REAL | xy_tflex | This value specifies the XY Torsion Flexibility value. |
REAL | zy_tflex | This value specifies the ZY Torsion Flexibility value. |
Output: | ||
INTEGER | <Return Value> | This function returns a value of 0 when executed successfully and a non zero value to indicate an error. |
Error Conditions: | ||
3001003 | %A% is an invalid Load Case Type. Must be Static or Time Dependent. | |
13000085 | Cursor not open | |
13000103 | No LBC was found | |
13000117 | The query specified has completed | |
14000001 | LpGetHeapSpace: Allocated heapspace is exhausted | |
14000003 | LpSublistType: No sublist filter bits are set on invocation | |
14000004 | LpSublistType: I am being invoked with a NULL list | |
14000005 | LpSublistType: In the list being used, the current sublist has a nonatomic CAR | |
14000006 | LpSublistType: In the list being used, the current geometry sublist is unclassifiable | |
14000007 | LpSublistType: In the list being used, the current finite element sublist is unclassifiable | |
14000008 | LpSublistType: In the list being used, the current token sublist is unclassifiable | |
14000009 | LpSublistType: In the list being used, the current sublist is unclassifiable | |
14000010 | LpSublistType: In the list being used, the current sublist does not match the sublist filter | |
14000014 | LpSublistNext: Attempt to proceed past last sublist in current list | |
14000015 | LpSublistNext: End of current list has been reached | |
14000201 | Invalid output string specified for call | |
26001010 | Load/BC Definition %A% does not exist. | |
26002011 | Load/BC Name %A% is too long. Input 31 characters or less. | |
26002030 | %A% already exists. Modify not permitted. | |
26002121 | %I% is an invalid number of application regions for the specified Load/BC definition. | |
26002134 | The list %A% contains FEM or unknown GEOmetric entities. All the entities in the application region(s) must be GEOmetric. | |
26002135 | The list %A% contains GEOmetric or unknown FEM entities. All the entities in the application region(s) must be FEM. | |
26002136 | %A% is an invalid Geometry Filter. Must be Geometry or FEM. | |
26002200 | There was no data input for this Load/BC Set. | |
26002201 | %I% is an invalid number of input data fields for the specified Load/BC definition. | |
26002701 | Load/BC set cannot be renamed to blank. | |
26002703 | No existing Load/BC set is selected. | |
26006001 | Database error encountered: %I%. Call PDA Hotline. | |
26006004 | Dynamic memory allocation error encountered. | |
1 | This is am internal status condition. There is no corresponding status message in the message database. |
flds_elas_verify_aero_elems | ( type, num_elems, elem_ids, reg_id ) |
Description: | ||
This function verifies that the list of element ids are all Aero elements. | ||
Input: | ||
STRING | type | Type of element property sets to be allowed |
INTEGER | num_elems | Number of elements to be verified |
INTEGER | elem_ids() | Array listing the element ids to be verified |
Output: | ||
INTEGER | reg_id | The id of the region the selected Aero elements belong to |
INTEGER. | <Return Value> | 0 = Success; 1=Failure |
flds_spline_verify_disp | ( splines, case_name, subcase_name, primary_name, animate_active, three_on, num_frames ) |
Description: | ||
This function display the results of the Spline verification. | ||
Input: | ||
STRING | splines() | This value specifies the array of selected spline names. |
STRING | case_name | This value specifies the structural load case name. |
STRING | subcase_name | This value specifies the selected spline result condition. |
STRING | primary_name | This value specifies the name of the result type. (Displacements or Eigenvectors) |
LOGICAL | animate_active | TRUE: if the results are to be animated; FALSE otherwise. |
LOGICAL | three_on | TRUE: if a 3D animation is to be done; FALSE otherwise. |
INTEGER | num_frames | This value specifies the number of frames to show if animate_active is TRUE. |
Output: | ||
None. |
flds_surf_spline_create | ( spline_name, spline_method, num_struc_nodes, struc_node_ids, num_aero_elems, aero_elem_ids, surf_id, linear_attach_flex, type, x_axis, y_axis ) |
Description: | ||
This function creates the Surface Splines given the information available on the SPLINE4 card. | ||
Input: | ||
STRING | spline_name | This value specifies the name of the Spline. |
INTEGER | spline_method | This value specifies the spline method. (1=GENERAL, 2=DISPLACEMENT, 3=FORCE) |
INTEGER | num_struc_nodes | This value specifies the number of Structural nodes specified. |
INTEGER | struc_node_ids() | This value specifies the array of Structural node ids. |
INTEGER | num_aero_elems | This value specifies the number of Aero elements specified. |
INTEGER | aero_elem_ids() | This value specifies the array of Aero element ids. |
INTEGER | surf_id | This value specifies the ID of the Surface that the selected Aero elements belong to. |
REAL | linear_attach_flex | This value specifies the Linear Attach Flexibility value. |
INTEGER | type | This value specifies the type. (1=HARDER_DESM, 2=THIN_PLATE, 3=FINITE_PLATE) |
INTEGER | x_axis | This value specifies the number of X-axis elements. |
INTEGER | y_axis | This value specifies the number of Y-axis elements. |
Output: | ||
INTEGER | <Return Value> | This function returns a value of 0 when executed successfully and a non zero value to indicate an error. |
Error Conditions: | ||
3001003 | %A% is an invalid Load Case Type. Must be Static or Time Dependent. | |
13000085 | Cursor not open | |
13000117 | The query specified has completed | |
14000001 | LpGetHeapSpace: Allocated heapspace is exhausted | |
14000003 | LpSublistType: No sublist filter bits are set on invocation | |
14000004 | LpSublistType: I am being invoked with a NULL list | |
14000005 | LpSublistType: In the list being used, the current sublist has a nonatomic CAR | |
14000006 | LpSublistType: In the list being used, the current geometry sublist is unclassifiable | |
14000007 | LpSublistType: In the list being used, the current finite element sublist is unclassifiable | |
14000008 | LpSublistType: In the list being used, the current token sublist is unclassifiable | |
14000009 | LpSublistType: In the list being used, the current sublist is unclassifiable | |
14000010 | LpSublistType: In the list being used, the current sublist does not match the sublist filter | |
14000014 | LpSublistNext: Attempt to proceed past last sublist in current list | |
14000015 | LpSublistNext: End of current list has been reached | |
14000201 | Invalid output string specified for call | |
26001010 | Load/BC Definition %A% does not exist. | |
26002010 | Load/BC Name is blank. Input a Load/BC Name. | |
26002011 | Load/BC Name %A% is too long. Input 31 characters or less. | |
26002121 | %I% is an invalid number of application regions for the specified Load/BC definition. | |
26002134 | The list %A% contains FEM or unknown GEOmetric entities. All the entities in the application region(s) must be GEOmetric. | |
26002135 | The list %A% contains GEOmetric or unknown FEM entities. All the entities in the application region(s) must be FEM. | |
26002136 | %A% is an invalid Geometry Filter. Must be Geometry or FEM. | |
26002200 | There was no data input for this Load/BC Set. | |
26002201 | %I% is an invalid number of input data fields for the specified Load/BC definition. | |
26006001 | Database error encountered: %I%. Call PDA Hotline. | |
1 | This is am internal status condition. There is no corresponding status message in the message database. |
flds_surf_spline_modify | ( spline_name, new_spline_name, spline_method, num_struc_nodes, struc_node_ids, num_aero_elems, aero_elem_ids, surf_id, linear_attach_flex, type, x_axis, y_axis ) |
Description: | ||
This function modifies the Surface Splines given the information available on the SPLINE4 card. | ||
Input: | ||
STRING | spline_name | This value specifies the name of the Spline. |
STRING | new_spline_name | This value specifies the new Spline name. |
INTEGER | spline_method | This value specifies the spline method. (1=GENERAL, 2=DISPLACEMENT, 3=FORCE) |
INTEGER | num_struc_nodes | This value specifies the number of Structural nodes specified. |
INTEGER | struc_node_ids() | This value specifies the array of Structural node ids. |
INTEGER | num_aero_elems | This value specifies the number of Aero elements specified. |
INTEGER | aero_elem_ids() | This value specifies the array of Aero element ids. |
INTEGER | surf_id | This value specifies the ID of the Surface that the selected Aero elements belong to. |
REAL | linear_attach_flex | This value specifies the Linear Attach Flexibility value. |
INTEGER | type | This value specifies the type. (1=HARDER_DESM, 2=THIN_PLATE, 3=FINITE_PLATE) |
INTEGER | x_axis | This value specifies the number of X-axis elements. |
INTEGER | y_axis | This value specifies the number of Y-axis elements. |
Output: | ||
INTEGER | <Return Value> | This function returns a value of 0 when executed successfully and a non zero value to indicate an error. |
Error Conditions: | ||
3001003 | %A% is an invalid Load Case Type. Must be Static or Time Dependent. | |
13000085 | Cursor not open | |
13000103 | No LBC was found | |
13000117 | The query specified has completed | |
14000001 | LpGetHeapSpace: Allocated heapspace is exhausted | |
14000003 | LpSublistType: No sublist filter bits are set on invocation | |
14000004 | LpSublistType: I am being invoked with a NULL list | |
14000005 | LpSublistType: In the list being used, the current sublist has a nonatomic CAR | |
14000006 | LpSublistType: In the list being used, the current geometry sublist is unclassifiable | |
14000007 | LpSublistType: In the list being used, the current finite element sublist is unclassifiable | |
14000008 | LpSublistType: In the list being used, the current token sublist is unclassifiable | |
14000009 | LpSublistType: In the list being used, the current sublist is unclassifiable | |
14000010 | LpSublistType: In the list being used, the current sublist does not match the sublist filter | |
14000014 | LpSublistNext: Attempt to proceed past last sublist in current list | |
14000015 | LpSublistNext: End of current list has been reached | |
14000201 | Invalid output string specified for call | |
26001010 | Load/BC Definition %A% does not exist. | |
26002011 | Load/BC Name %A% is too long. Input 31 characters or less. | |
26002030 | %A% already exists. Modify not permitted. | |
26002121 | %I% is an invalid number of application regions for the specified Load/BC definition. | |
26002134 | The list %A% contains FEM or unknown GEOmetric entities. All the entities in the application region(s) must be GEOmetric. | |
26002135 | The list %A% contains GEOmetric or unknown FEM entities. All the entities in the application region(s) must be FEM. | |
26002136 | %A% is an invalid Geometry Filter. Must be Geometry or FEM. | |
26002200 | There was no data input for this Load/BC Set. | |
26002201 | %I% is an invalid number of input data fields for the specified Load/BC definition. | |
26002701 | Load/BC set cannot be renamed to blank. | |
26002703 | No existing Load/BC set is selected. | |
26006001 | Database error encountered: %I%. Call PDA Hotline. | |
26006004 | Dynamic memory allocation error encountered. | |
1 | This is am internal status condition. There is no corresponding status message in the message database. |