CR # | Description |
1-207017422 | Results from only one of two subcases were being recognized when attaching a certain XDB file. |
1-224541999 | Patran was crashing when submitting a Marc contact analysis using a specific glued contact configuration. |
1-225675930 | Stress results from SOL 400 Nastran job not loading into the database via an OP2 file. |
1-214218661 | SOL 400 auto detection of discontinuities option and feature angle not written to input file for contact bodies. |
1-209366561 | Undefined TREF and GE values not written correctly on Nastran PCOMP entry - should be blank and not zero. |
1-73240931 | No contact status results for glued contact visible from Master/DBALL file. |
1-190723085 | Setting the search order in glued contact table causes fatal Nastran error. |
1-229666261 | Initial load factor for adaptive load stepping not written correctly for Nastran NLAUTO entry. |
1-201680911 | PCL call ui_wid_get( file_id, "DIRNAME", dir_name ) failed for ui_file_create. |
1-76537319 1-76524241 1-76524211 1-76524177 1-76524151 1-76524265 | Nastran SOL 400, PCOMPLS - various problems corrected when writing this Nastran entry. |
1-201681161 | xplus_ideasp_env_setup.pm references incorrect Registry key and value for I-DEAS 12 |
1-201664504 | Patran 64bit installer needs to install C++ redistributable run time for Windows 64 bit machines. |
1-229241571 1-226511628 | LS-DYNA3D translator failed on Windows 64 bit machines. |
1-238894248 | Large list boxes behaved differently on Unix where they are always shown in "Scrolled Down" position. On Windows, the behavior is correct |
1-78152616 | After importing optimization results via OP2 file, unable to update the analysis model with new optimized design varialbe data. This used to be available via modifying the design study, selecting the design variable form, and then selecting the design cycle. |
1-201184619 | Patran crashed when reading in a certain bulk data files. |
1-77732679 | Cannot enter a negative non structural mass in Patran to adjust the mass. |
1-51257236 | Patran slow to plot stresses (when averaged by property). |
1-201388666 | Patran crashes when making graph vs. time of Abaqus ODB with multiple element types. |
1-81107411 | Patran can not plot stress tensor via Marc DRA (t16 file) access due to unsupported elements. |
1-200507145 | Patran higher then 2005r3 does not filter Load Cases for Loads/BCs Plot Contour. |
1-204211401 | Patran does not write weight constraint for topography optimization. |
1-225741151 1-226095761 1-228867342 | MSC.Explore update - support SOL 106 nonlinear results |
1-239622301 | In Patran 2009r1, the following PCL functions have been made available: xy_window_location_get ( window_name, x, y ) xy_window_size_get( window_name, width, height ) First argument is a string and other arguments are reals. |
1-79420181 | Patran - External SE create - DMIGOP2 option not selectable. |
1-21430771 | Performance regression in ABAQUS input file reader. |
23595 | ABAQUS preference request to support inertia loads on 0D elements. |
1-226510955 | Patran Crashes extruding certain solids. |
1-238125958 | Switching to 3D:FullSpan beam display mode is very slow. |
1-251149191 1-252995071 | Patran - Tools/Properties Import appears not to work when attempting to create new properties. |
1-251808281 | Patran does not write NLMOTPS,TSHEAR,TSHEAR. |
1-250846898 | Regression in default values of T1/T2 fields of TEMPP1 Nastran entries. |
1-252274151 | Model disappears when displaying results under Design Study / Post Processing menu. |
1-250623265 | General Section (CBEAM) option writes out incorrect pin flags |
1-253107416 | sf_record PCL function in the PCL start up files causes duplicate session files. |
1-250554091 | Segmentation fault and traceback message after File-Quit Patran on some Linux configurations (LX86). |
1-251885801 | Import bdf - Contact Distance Tolerance set to -9.9e+010 (should be blank) |
1-250704310 | Regression in reading certain ABAQUS fil result files. |
39876 | Save history lines disabled since Patran 2000r1 on Windows. |