SimAcademy Webinar Archive: Multi-Stage Simulation and PRE STATE Option in Marc
In many cases, it is necessary to analyze a nonlinear process in several stages. Each stage may involve different contact bodies and boundary conditions, but history data such as temperatures, displacements, stresses and strains have to be carried over for contact bodies to be passed from one stage to another. The pre state option is one of two methods available to transfer data from one analysis to another for multi-stage simulations. It is designed to read data from a Marc results file and to use the data as initial conditions in the new analysis. In a contact analysis, it allows the selection of contact bodies to easily apply the data to parts of the current model.
SimAcademy Webinar: Node to Segment and Segment to Segment Contact in Marc
Simulating many physical problems requires the ability to model the contact phenomena. This includes analysis of interference fits, rubber seals, tires, crash, and manufacturing processes among others. The analysis of contact behavior is complex because of the requirement to accurately track the motion of multiple geometric bodies, and the motion due to the interaction of these bodies after contact occurs.
SimAcademy Webinar Archive: Design Optimization Using MSC Nastran Embedded Fatigue
In real world, fatigue accounts for more than 60% of failure. The phenomenon has been identified almost 165 years ago; but still not fully understood. However several practices have been invented over the years to predict the fatigue life. Today it is recognized that fatigue failures can’t be avoided thoroughly, nonetheless provision can be taken at least to reduce the chances of fatigue failure.
SimAcademy Webinar Archive: MSC Apex Tips and Tricks
MSC APEX is designed to provide engineers and CAE analysts with the most efficient and easy-to-use CAE tools on the market. This presentation will demonstrate how to use some of these Tools while doing a start-to-finish example of a Linear Static Analysis problem. An assembly model will be imported, meshed, and connected using MSC APEX’s Create Glue option.
SimAcademy Webinar Archive:Linear Static Analysis Workflow Using MSC Apex
MSC APEX is designed to provide engineers and CAE analysts with the most efficient and easy-to-use CAE tools on the market. This presentation will demonstrate a sample workflow for Linear Static Analysis using MSC APEX Eagle Version. It will help you become familiar with various aspects of MSC Apex including mid-surfacing, meshing, analysis readiness and results processing.