Virtual prototyping of Magneto-Rheological (MR) damper by comparing realistic motion behavior using Adams

Anisotropic explicit simulation, considering manufacturing effects and nonlinearity

Accurate prediction of part performance in response to static loads for short fiber reinforced composites

Designing a plastic robotic arm using Adams & MSC Nastran

SimAcademy Webinar Archive: Mapping Temperature Results from ScFlow onto Structural Mesh using Patran

Temperatures generated by fluid flow play a significant role in structural applications. The temperature distribution will generate thermal stresses which should be accounted for to get realistic results. It is assumed in this example that the deformation caused by a fluid flow will be very small and this deformation will not affect the flow itself, so pressure is not used. The temperature distribution from fluid flow is considered on the structural mesh. After the temperature field is solved on the scFlow polyhedral mesh, this temperature data is mapped onto the structural Hex mesh using the scConverter tool. The data is then brought into Patran to setup the SOL 400 job with the temperature conditions along with structural boundary conditions.

Race sports: Catch the highest performance with lightweight design

Acoustics TechWeek 2020 – Day 5 Wrap-Up and Introduction to Actran JumpStart

Acoustics TechWeek 2020 – Day 4 Duct Acoustics

Acoustics TechWeek 2020 – Day 3 Acoustic Transparency

Acoustics TechWeek 2020 – Day 2 Acoustic Radiation

Acoustics TechWeek 2020 – Day 1 Industrial Context & Challenges

Big Data en materiales y procesos para la Fabricación Aditiva

Análisis, simulación y diseño de Bombas y Válvulas

Estrategias de reducción de costes para Troqueles Progresivos

SFRP en Automoción con Digimat