|
|
 |
|
Hardware and Software Specifications
for MSC.EASY5 2005 r1
Hardware Vendor |
Models and Processors |
Operating System |
Fortran |
HP
PA-RISC
HP-UX |
PA-RISC
2 |
HP-UX
11.11 (PA-RISC 2) |
f90
2.4.13+ |
IBM
POWER
AIX |
Power |
AIX4.3+ |
Fortran
5.01 |
| Intel & AMD x86
Linux |
Intel Pentium 4, Xeon,
and compatibles |
Red
Hat Linux 9.0 |
GCC
3.2.3 |
| Intel
& AMD x86 Windows |
Intel
Pentium 4, Xeon,
and compatibles |
Windows
2000,
Windows XP Professional |
Intel Fortran 8.0 or 8.1
Compaq Visual Fortran 6.x
GNU GCC Version 3.2.3 (mingw) |
Sun
UltraSPARC
Solaris |
UltraSPARC
III-
based systems |
Solaris
2.8+ |
Sun
5.3+ |
Back to top
Use of a C Code User Code Component requires a compatible C compiler (matching the Fortran compiler used).
For Windows, this translates into the following table:
Hardware Vendor |
Fortran |
C/C++ |
| Intel
& AMD x86 Windows |
Compaq Visual Fortran 6.x
Intel Fortran 8.0 or 8.1
GNU GCC Version 3.2.3 (mingw) |
Visual Studio C++ 6.0
Visual Studio C++ .NET 2003,
or Visual Studio C++ .NET 2003 Toolkit
Included |
Note: Use
of the Matlab Interface requires one of the following C compilers, depending
on which Fortran compiler is being used, and which version of the Matlab
Interface is used (green indicates "supported", yellow indicates
"unsupported, but should work"). If no C compiler is available,
you can only use the
Matlab Interface with Compaq Visual Fortran 6.x, and you must manually
install the Matlab Interface
version 4.0.5.
Matlab C/C++ Compiler |
EASY5 Fortran Compiler |
Compaq Visual
Fortran 6.x |
Intel Fortran
8.0 or 8.1 |
GNU GCC
Version 3.2.3 |
| Visual Studio C++ 6.0 |
XI 5.0.x |
XI 5.0.x |
XI 5.0.x /
EASY5 8.0.X |
| Visual Studio C++ .NET 2003 |
XI 5.0.x |
XI 5.0.x |
XI 5.0.x /
EASY5 8.0.X |
| Visual Studio C++ .NET 2003 Toolkit |
XI 5.0.x |
XI 5.0.x |
XI 5.0.x /
EASY5 8.0.X |
| Matlab
LCC |
XI 5.0.x |
XI 5.0.x |
XI 5.0.x /
EASY5 8.0.X |
| Compaq Visual Fortran 6.x |
XI 4.0.5 |
|
|
Platform |
Operating
System |
System
Patches |
Disk Space |
Memory
and
Swap Space |
HP
PA-RISC
HP-UX |
HP-UX
11.11 |
N/A |
Products
and Docs 450 Mb |
64 Mb Minimum
256 Mb Recommended
Swap
= 2 x RAM |
IBM
POWER
AIX |
AIX
4.3+ |
N/A |
Products
and Docs 450 Mb |
64 Mb Minimum
256 Mb Recommended
Swap
= 2 x RAM |
| Intel & AMD x86
Linux |
Red Hat Linux 9.0 |
N/A |
Products
and Docs 450 Mb |
64 Mb Minimum
256 Mb Recommended
Swap
= 2 x RAM |
Intel & AMD x86
Windows |
Windows 2000 |
Windows
2000 SP4 |
Products
and Docs 450 Mb |
64 Mb Minimum
256 Mb Recommended
Swap
= 2 x RAM |
Intel & AMD x86
Windows |
Windows XP
Professional |
Windows XP Professional SP1,
Windows XP Professional SP2 |
Products
and Docs 450 Mb |
64 Mb Minimum
256 Mb Recommended
Swap
= 2 x RAM |
Sun
UltraSPARC
Solaris |
Solaris
2.8+ |
N/A |
Products
and Docs 450 Mb |
64 Mb Minimum
256 Mb Recommended
Swap
= 2 x RAM |
Back
to top
Platform |
Operating System |
System Runtime Libraries |
Validated Graphics Hardware |
| All platforms |
N/A |
N/A |
A
video display card and 17-in monitor combination providing 1,280
by 1,024 pixels of graphics resolution at 75 Hz or greater with
256 colors. |
Back to top
Platform |
Special Required Software |
Hostname Retrieval |
Host
ID Retrieval |
HP
PA-RISC
HP-UX |
N/A |
From a shell window, enter
the command:
hostname
|
From a shell window, enter the
command:
uname -I
|
IBM
POWER
AIX |
N/A |
From
a shell window, enter the command:
hostname
|
From a shell window, enter the
command:
uname -l
|
Intel & AMD x86
Linux |
N/A |
From
a shell window, enter the command:
hostname |
From a shell window, enter the
command:
/sbin/ifconfig eth0
Return the information in the line
labeled "HWaddr" and remove the
colons ":". |
Intel
& AMD x86
Windows |
TCP/IP
Protocol |
From
a "Command Prompt"
window, enter the command:
hostname |
From a "Command Prompt"
window, enter the command:
ipconfig /all
Return the information in the
line labeled "Physical Address". |
Sun
UltraSPARC
Solaris |
N/A |
From
a shell window, enter the command:
hostname
|
From a shell window, enter the
command:
hostid
|
Back to top
Dropped
Platforms and Transition Plans
Each release we review
the platforms and operating systems changes by our partners and in the
industry,
and address these changes in our release.
Platforms
no longer supported after the MSC.ADAMS 2004 r2 release
| Platform |
Final Release Supported
|
Migration
Platform |
HP Itanium2
HP-UX |
2004 r2 |
Other supported UNIX or Windows Platform |
SGI
MIPS
IRIX
|
2004
r2
|
Other
supported UNIX or Windows Platform
|
Windows
NT 4.0 |
2004
r2
|
Windows 2000, Windows XP, and Windows XP Professional |
Updated: 02/24/2006 |
|
|
|
