This page contains the results of several jobs running on
different hardware platforms. All jobs were run by hardware
partners.
Current partner contact information is here.
Below is a summary of the test problems.
| Name | Ndof | Description | SOL | MEM | SCR Disk | Total I/O | Comments |
|---|---|---|---|---|---|---|---|
| xl0tdf1 | 529,257 | car body | 111 | 520 Mb | 5 Gb | 190 Gb | Direct Frequency Response |
| xx0cmd2 | 1,315,340 | Car Body | 103 | 1800 Mb | 13 Gb | 202 Gb | Normal Modes with ACMS |
| xl0xdy0 | 286,216 | Truck | 700 | 300 Mb | Crash Analysis | ||
| md0mdf1 | 42,066 | Half Sphere | 108 | 1000 Mb | 392 Mb | 81 Gb | Direct Frequency response w/ exterior acoustics, and UMFPACK |
| xx0wmd0 | 3,799,278 | Car Body | 103 | 2000 Mb | 169 Gb | 3600 Gb | Frequency Response w/ (interior) acoustics, and ACMS |
Below is a description of the hardware used. Details regarding computer, disk, network and OS configuration are listed at the bottom of this page.
| Vendor | Hardware | O/S |
|---|---|---|
| HP DL160 G5 | Intel X5472 3000 MHz | Linux RHEL 5.2 |
| HP BL465c G5 | AMD 2384 Shanghai 2700 MHz | Linux SLES 10.2 |
| HP BL860c | Intel/Itanium 2 1600 MHz | Linux RHEL 4 |
| IBM POWER 6 | p570 2200 MHz POWER 6 | AIX 5.3 |
| Intel Xeon Nehalem | Intel Xeon (Nehalem 2930 MHz) (24Gb w/ SSD) or (48Gb w/o SSD) | RHEL 5.3 |
| Intel Xeon Harpertown | Intel Xeon (Harpertown 3200 MHz) | Linux RedHat 5.1 |
| SUN X6250 | Dual Core Intel 3330 MHz | Linux SLES 10 SP1 |
| Elapsed Times (sec) for XL0TDF1 | ||||
|---|---|---|---|---|
| Vendor | Serial | DMP=2 | DMP=4 | DMP=8 |
| HP:DL160 Xeon | 3418 | 1757 | 898 | 484 |
| HP:BL465c Opteron * | 4736 | 2411 | 1586 | 784 |
| HP:BL860C Itanium * | 2865 | 2127 | 1966 | |
| Intel Nehalem w/ SSD * | 2149 | 1159 | 737 | 618 |
| Intel Nehalem * | 2295 | 1162 | 694 | 737 |
| Intel Harpertown * | 3581 | 1903 | 1175 | |
| IBM:P6 570 ( I4 ) * | 1709 | 912 | 513 | 326 |
| IBM:P6 570 ( I8 ) * | 1632 | 863 | 477 | 306 |
| Sun w/ Lustre | 1573 | 808 | 679 | |
| Sun | 3358 | 1729 | 876 | 705 |
| Elapsed Times (sec) for xx0cmd2 | ||||
|---|---|---|---|---|
| Vendor | Serial | DMP=2 | DMP=4 | DMP=8 |
| HP:DL160 Xeon | 1168 | 734 | 898 | 351 |
| HP:BL465c Opteron * | 1095 | 675 | 507 | |
| HP:BL860C Itanium * | 1596 | 1046 | 812 | |
| Intel Nehalem w/ SSD * | 887 | 639 | 405 | |
| Intel Nehalem * | 915 | 561 | 408 | |
| Intel Harpertown * | 1142 | 727 | 555 | |
| IBM:P6 570 ( I4 ) * | 959 | 616 | 419 | 343 |
| IBM:P6 570 ( I8 ) * | 920 | 574 | 392 | 322 |
| Sun | 1253 | 796 | 576 | 450 |
| Elapsed Times (sec) for xl0xdy0 | |||
|---|---|---|---|
| Vendor | Serial | DMP=2 | DMP=4 |
| HP:DL160 Xeon | 3410 | 1871 | 994 |
| HP:BL465c Opteron | 3750 | 2063 | 1252 |
| HP:BL860C Itanium | 6726 | ||
| Intel Nehalem w/ SSD | 2534 | 1486 | 881 |
| Intel Nehalem | 2467 | 1537 | 905 |
| Intel Harpertown | 1958 | 1069 | |
| IBM:P6 570 ( I4 ) | 4921 | 2692 | 1506 |
| IBM:P6 570 ( I8 ) | 4921 | 2692 | 1504 |
| Elapsed Times (sec) for md0mdf1 | |||
|---|---|---|---|
| Vendor | Serial | DMP=2 | DMP=4 |
| HP:DL160 Xeon | 1218 | 617 | 311 |
| HP:BL465c Opteron * | 1385 | 693 | 365 |
| HP:BL860C Itanium * | 1171 | 873 | 476 |
| Intel Nehalam w/ SSD * | 902 | 479 | 235 |
| Intel Nehalem * | 922 | 470 | 251 |
| Intel Harpertown * | 1167 | 612 | 314 |
| IBM:P6 570 ( I4 ) * | 911 | 469 | 242 |
| Sun | 1153 | 576 | 291 |
| Elapsed Times (sec) for xx0wmd0 | ||||
|---|---|---|---|---|
| Vendor | Serial | SMP=2 | DMP=2 | SMP=2 DMP=2 |
| HP:BL465c Opteron * | 16467 | 16445 | 11064 | 10816 |
| HP:BL860C Itanium * | 24194 | 21741 | 18135 | 16822 |
| Intel Nehalem w/ SSD * | 15763 | 11958 | ||
| Intel Nehalem * | 17651 | 13555 | 13068 | 11045 |
| Intel Harpertown * | 21319 | 16537 | ||
| IBM:P6 570 ( I4 ) * | 13699 | 12178 | 9353 | 8563 |
| IBM:P6 570 ( I8 ) * | 14272 | 12406 | 9771 | 8690 |
| Sun | 21428 | 17322 | 19032 | 16930 |
Additional Comments:
* These Parallel jobs were run on a single node with multiple CPUs. Other systems were run on "clusters" with multiple nodes. In general, MD Nastran runs better on clusters. This information should be considered when comparing numbers. MSC apologizes for the discrepancy of runs.
Hardware Details:
Model: DL160 G5
CPU: Intel Xeon 5472 3000 MHz (2 Quad Cores)
OS Level: RedHat Linux 5.2
Memory: 64 Gb
Disk: 4 SAS disks per node
Model: BL465c
CPU: AMD Shanghai 2384 2700 MHz (2 Quad Cores)
OS Level: Linux SLES 10.2
Memory: 32 Gb
Disk: BL40c storage blade with 6 72GB 15 K rpm disks
Model: BL860c
CPU: Itanium 2 1600 MHz (2 Processors / 4 Cores)
OS Level: RedHat Linux 4
Memory: 48 Gb
Disk: SB40c storage blade with 6 disks
Model: Xeon 5482 Harpertown (2 CPUs / 4 CORES)
CPU: 2 Quad-Core Intel Xeon Harpertown Processor 3200 MHz, C0 Stepping
OS Level: RedHat 5.1
Memory: 32 Gb
Disk: 4 X 73 Gb U320 15K RPM Software Raid 0
Model: Xeon 5570 Nehalem (2 CPUs / Quad CORES)
CPU: 2 Quad-Core Intel Xeon Nehalem Processor 2.93GHz, C0 Stepping 6.4 GT/s QPI
Turbo: enabled, EIST: enabled, HT: enabled
OS Level: RedHat 5.3 beta ( 2.6.18-120.e15)
Memory w/o SSD: 48Gb DDR3-1067MHz ( 12X 4Gb)
Disk w/o SSD: 4 X 146Gb 15K RPM U320 SCSI SW Raid0
Memory w/ SSD: 24Gb DDR3-1067MHz ( 12X 2Gb)
Disk w/ SSD: 4 X Intel X25-E SATA Solid State Disk SW Raid0
Model: System p6 570
CPU: POWER6 4.7 GHz CPUs (4 socket, dual core)
OS Level: AIX 5.3 TL06, ESSL 4.3.0.3, POE 4.3.1.0
Memory: 64 Gb (64 GB large pages)
Disk: JFS2 striped on 24 (15k rpm) U320 disks
Model: X6250 (2 CPUs)
CPU: Intel 5260 3.33 GHz Processors
OS Level: SLES 10 SP 1
Memory: 667 MHz DDR2R. Memory varied on each node from 12Gb to 66Gb.
Disk: Sun StorageTek 6140 array
Lustre Lustre Version 1.6.4.3:
Sun Fire X2200 M2's supporting server: 2 data servers and one meta data server
Interconects: Infiniband GridStack-4.1.5_7-sles-k2.6.16.21-0.8-smp-x86