Virtual
Prototyping with Multi-Body Dynamic Software |
Kookmin University |
S.S. Kim |
MDI
Virtual Prototyping and Testing Direction |
MDI |
Mike Hoffmann |
A
Study on the Lift Capacity of Large-sized Tow Truck |
KIA Motors Corp. |
K.H. Suh, J.Y. Kuk, I.B. Chyun |
An
Analysis on the Ground Impact Load of the Landing Gear System |
ADD (Agency for Defense Development) |
S. Choi |
The
use of Fatigue Calculation in the Durability Engneering Process |
nCode |
Peter Heyes |
Interesting
Modeling Tips using Vector Force Elements |
SeoMoon Technology Inc. |
J.S. Shim |
Vibration
Analysis of Damper Module using an ADAMS |
Mando |
K.H. Yoon, N.I. Jun, J.S. Shim |
Rigid
Body Dynamic Analysis of Upper and Lower Jaw-Bones
for the Calculation of the Impact Force Applied on a Dental Implant System |
Hongik University |
Y.J. Kwon |
Role
of Tire Modeling on the Design Process of a Tire and Vehicle System |
Hankook Tire Co. Ltd. |
G. Gim, Y. Choi |
Shock
Absorber Modeling using Artificial Neural Networks |
Hyundai Motor Co. |
L.Y. Chan, H.H. Sung |
Estech
Supporting the Noise and Vibration Needs |
ESTECH |
Toshiro Abe |
ADAMS
Product Releases 12.0 and Beyond |
MDI |
Doug Peterson |
Simulation
of Dynamic Behavior of Thermal Overload Relay Mechanism with Flexible
Flat Spring |
LG Cable |
K.Y. Ahn, B.H. Kwon, K.K. Lee, K.M.
Kim, W.S. Eom |
R&H Analysis of Vehicle using ADAMS/Car |
Hyundai Motor Co. |
C.B. Lee, K.T. Kye, Y.J. Kim |
Development
of GUI Control Technology for Interfacing and Automation of an External
Optimization Module with ADAMS/Car |
Hanyang University |
B.L. Choi, M.S. Chu, D.H. Choi |
Intergrating Virtual and Physical Simulation to Improve the Validation
Process |
MTS |
Bill Bigot |
Simultion
of Vehicle Having Flexible Body Frame on Bump |
Çö´ëÀÚµ¿Â÷ |
Y.G. Cho, C.S. Song |
A
Motion Control of Hydraulic System using Variable Orifice |
ADD (Agency for Defense Development) |
J.W. Jeong, H.S. Jeon, Y.S. Bae |
Development
of an Automatic Pick-up Mechanism for Plug-Seedings |
Seoul University |
W.C. Choi, D.C. Kim, K.U. Kim |
Development of an Automatic Transplanter for Cabbage |
NAMRI (National Agricultural Mechanization
Research Institute) |
H.J. Kim, S.H. Park, T.Y. Kwak |
A
Study on the Dynamic Behavior of an Automatic Washing Machine |
Samsung Electronics Co., Ltd. |
C.M. Song, S.H. Hwang, J.Y. Lee, S.
Suzuku, W.K. Heo |
Handling
Analysis of Active Height Control System using ADAMS |
Mando R&D Center
Hyundai Motor Co.
SeoMoon Technology Inc. |
W. Kim, J.W. Lee
H.S. Kim, W.J. Do, Y.I. Yoo
J.S. Shim, J.W. Lee |
Flexible
Multibody Dynamic Analysis of Missile Behavior for the initial Launching
Stage |
ADD (Agency for Defense Development) |
Ahn, Jin-Soo, Lim, Beom-Soo |
Vibration
Analysis of Vehicle Driveline with 2 Pieces of Propeller Shaft |
Woosuk University |
C.R. Lee |
A
study on the structural characteristics and roll behavior of suspension
for the section profile of torsion beam |
IAE (Institute for Advanced
Engineering) |
D.C. Lee |