Day 2: Tuesday,
June 20 |
7:00 |
Continental Breakfast & Registration |
8:00 |
ADAMS OVERVIEW & DIRECTION
ADAMS Overview &
Release Plans - D. Peterson, MDI
Industry-Specific Solutions:
Functional Digital Car(TM),
Functional Digital Aircraft(TM), Functional Digital Train(TM)
(ADAMS/Car, ADAMS/Pre, ADAMS/Engine, ADAMS/Driveline, ADAMS/Landing
Gear) - M. Young, MDI
Web-Based Functional Collaboration:
ADAMS/Insight and Rapid Simulation
Technology: The Power of Virtual Prototyping - D. Hargett, S.
Koerner, MDI
Response Surface Methodology (RSM)
and Design of Experiments (DOE) Applied to Racecar Vehicle Dynamics
Simulation and Development - L. Bishop, D. Fredriksson, MDI |
9:45 |
Morning Break |
10:00 |
AUTOMOTIVE
Simulation of the Stick-Slip
Friction between Steering Shafts Using ADAMS - Y. Rui &
D. Wang, Ford Motor Co.
Automobile CVT Shift
and Park Mechanism and Power Lift Gate Simulation Using ADAMS
(and CATIA) - S. Sui, J. Hirshey, DaimlerChrysler
Linking ADAMS/Car and ADVISOR
for Advanced Vehicle Evaluation - K. Wipke, NREL; S. Joshi,
MDI
A Study of Suspension Design
Using Optimization Technique and DOE - K. Motoyama,
T. Yamanaka, MDJ |
AEROSPACE / DEFENSE
Using ADAMS 6-DOF Model to
Predict Flight Behavior of Navy Mine Countermeasure
- G. Prybyla, D. Tassia, Naval Surface Warfare Center
Using ADAMS to
Model Cable Driven Hyper-Redundant Flexible Manipulators
- S. Slagowski, GreyPilgrim Inc.; C. Potter, Advanced Simulation
Technology
Nano Rover Solar Sail Dynamic
Simulation - M. Johnson, G. Levanas, Jet Propulsion Laboratory;
S. Haase, B. Balachandra, Swales Aerospace
Software Development for
Processing Simulation on the Missile Ejection System Using ADAMS
- J. Yu & W. Guo, Beijing Univ. |
12:00 |
Lunch - Sponsored by SGI |
13:15 |
AUTOMOTIVE
Truck Seat Modeling
Methods Development
and Ride Quality Investigation - K. Hix, Navistar International;
S. Ziemba, L. Schoof, MDI
Virtual Prototyping of Automotive
Open Air Systems Using CAT/ADAMS - C. Dilluvio, ASC Inc.
Effects of Non-Steady
Aerodynamic Forces on Car Handling: Implementation of a New Experimental-Numerical
Model for Longitudinal - A. Zasso, Politecnico di Milano
Virtual Prototyping of a
Transit Bus to Predict Service Life - G. Ashdown,
Orion Bus;
J. Sharp, S. McLellan, D. Nelson, MDI |
AEROSPACE
Focus Control System
for Solar Thermal Propulsion - S. Wassom, Thiokol Propulsion
Deployment
Dynamics of Solar Array with Body Rates - B. Lakshmi narayana,
B. P. Nagarajand, B. S. Nataraju; ISRO Satellite
Study on a Novel
Method of Building the Parameterized Models- W. Guo &
J. Yu, Beijing University
Co-simulation for Spacecraft
Attitude Control Analysis
- W. Daniels, MDI |
15:00 |
Coffee Break |
15:15 |
AUTOMOTIVE
Double Offset CV Joint
Analysis Program
Based on ADAMS - P. Klevann, Dana Corporation; J. Park, MDI
Engine Cranktrain System
Simulation and Validation
- S. Hwang, J. Chen, Ford Motor Co.; Y. Jiang, MDI
Development of Simulation
Technology for Dynamic Behavior of Crankshaft System in Motorcycles
- T. Niino, Honda
Dynamic Crankshaft Stress
Calculation Using a Combination
of MSS and FEA - P. Kley, M. Rebbert, R. Lach, FEV Motorentecnik |
GENERAL CAD-EMBEDDED
Enhanced
Performance of a Slider Mechanism - N. Shareef, Bayer
Corp.
Modeling of a Lathe Chuck for
Turning Aluminum Wheels Using Dynamic Designer for SolidWorks -
B. Emerson, Ward Machine Tool Inc.; S. Ziemba, MDI
Integrated Kinematic Analysis of
Robot Assembly -D. Young, Engineering Methods |